BFKK 1U Vented Cantilever Rack Shelf 152mm Depth 44lb Capacity

1U Vented Cantilever Shelf for 19-Inch Racks

This 1U vented cantilever shelf mounts in any 19-inch rack or cabinet to hold IT, network or AV equipment. The open design promotes airflow around the devices while keeping the installation footprint to a single rack unit. It ships disassembled so you can configure the lip orientation to suit different mounting needs. Builders who need deeper support for heavy chassis should look elsewhere.

44 lb Capacity with 1.2 mm Side Walls

The load-bearing sides are 1.2 mm thick and rated for a maximum of 44 pounds, which is the key figure for deciding whether your hardware is within safe limits. The vented steel surface distributes weight across the full 152 mm depth. Equipment that exceeds this rating or requires a deeper mounting surface will not be supported safely.

Tool-Less Lip Orientation and Included Fasteners

Assembly is straightforward: the shelf arrives in pieces with four M6 screws, four M6 cage nuts, four M5 screws and four M5 nuts included. The lip can be installed facing up or down depending on cable routing or retention preferences. The disassembled packaging reduces transit damage to the mounting ears, but installers must remember to tighten all fasteners evenly to prevent rack misalignment.