BFKK 24V 6A 120W power adapter 5.5x2.1mm jack 1.2m
Converts 100-240V AC to 24V DC at up to 6A and 120W with a 5.5x2.1mm jack, 1.2m cable, and LED terminal connector for solder-free wiring
- Delivers stable 24 V DC at up to 6 A for reliable device operation
- Wide 100–240 V AC input works worldwide on 50/60 Hz mains
- Built-in overload, over-voltage, over-temperature and short-circuit cut-offs protect connected equipment
- LED terminal connector enables secure screw-down wiring without soldering
- 2 m cable with 5.5 × 2.1 mm centre-positive jack fits many 24 V devices
24 V 120 W power adapter
This 24 V 6 A desktop power supply converts 100–240 V AC at 50/60 Hz into a stable 24 V DC output rated at 120 W. It is intended for any 24 V device that draws up to 5 A, such as LED strips, CCTV cameras, LCD monitors, water purifiers or small DC motors.
5.5 × 2.1 mm jack and screw terminal
The unit ships with a standard 5.5 mm outer, 2.1 mm inner barrel connector wired centre-positive and a detachable LED terminal block that accepts bare wires without soldering. A 1.2 m output cable gives flexible placement, while the enclosed plastic housing runs silently and relies on optimised internal layout for heat dissipation.
Replaces lower-rated 24 V bricks
If your existing adapter is rated below 120 W or lacks overload, over-voltage, over-temperature and short-circuit cut-offs, this model adds those protections and the screw-terminal option for permanent wiring. It will not suit devices that require more than 144 W or a different output voltage.
How it compares
Measured against everything we stock in AC Adapters & Power Bricks, at today’s prices. Recalculated every night.
- Price $54.99
- Pricier than about 81% of the 3,875 comparable items (median $23.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
What is the output voltage and current rating of this adapter?
The adapter delivers 24 V DC at up to 6 A, providing a maximum of 120 W.
What is the DC jack size and cable length?
It uses a standard 5.5 x 2.1 mm centre-positive jack on a 1.2 m (3.94 ft) cable.
How do I connect bare wires to the LED terminal connector?
Loosen the screw terminals, insert the stripped wires, then tighten the screws — no soldering required.
More in AC Adapters & Power Bricks
Similar items
TAURKENAM Garage Door Extension Spring 25-Inch 120-Pound Black N281-063
TAURKENAM 12 Gauge Primary Automotive Wire Red Black 100ft 2 Roll Pack power adapter
MOMAX UA15G 120W GaN power adapter Gold 2.0 in 10.2 oz
- 120 W
- Gold





