We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Clear plastic RJ45 pass-through connectors with gold contacts, 100 pieces

BFKK

BFKK Cat6 Pass Through RJ45 Connectors 100-Pack

SKU CH-V8PA-6J7F4

Pass-through RJ45 plugs with 15 µm gold contacts for Cat6 solid or stranded wire, 100 pieces

  • Pass-through design lets you verify wire order before crimping
  • 15 micron-inch gold-plated contacts resist corrosion
  • Staggered 1.10 mm holes accept 24 to 26 AWG solid and stranded cable
  • Clear PC housing gives full transparency for easy wire inspection
  • 100 connectors in one pack for large installations

100-Pack Cat6 Pass-Through RJ45 Connectors

These connectors are designed for technicians and installers terminating UTP Cat6 solid or stranded cables from 24 to 26 AWG. The pass-through design lets wires exit the front so the wiring order can be verified before crimping. A clear polycarbonate body aids visual inspection during assembly. The pack contains one hundred pieces for larger wiring projects.

Gold-Plated Contacts and Staggered Hole Layout

Each plug uses three-prong contacts 0.35 mm thick with a tolerance of ±0.02 mm, plated with nickel and 15 micro-inches of gold for corrosion resistance. Staggered holes with a 1.10 mm outer diameter are arranged four up and four down to match Cat6 conductor geometry. The housing is made from 100% new polycarbonate material compliant with RoHS and REACH standards.

Reliable Termination for Structured Cabling Jobs

The pass-through feature reduces rework by allowing immediate confirmation of pin-out before the crimp is made. Gold-plated contacts maintain low resistance over repeated mating cycles in patch panels or wall outlets. Clear housings speed up quality checks on site. This pack suits installers who need consistent, standards-compliant terminations without guessing wire order.

How it compares

Measured against everything we stock in Ethernet & LAN Cables, at today’s prices. Recalculated every night.

Price $28.99
Pricier than about 74% of the 9,945 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

How do I install these pass-through RJ45 connectors and what step do people get wrong?

Strip the cable, insert wires through the staggered 1.10 mm holes in the correct order, verify the sequence through the clear PC body, then crimp with a pass-through tool; the common error is skipping the visual check before crimping.

What maintenance or replacement will these connectors need later?

The 15 µin gold-plated 3-prong contacts resist corrosion, so no routine maintenance is required; replace only if a connector is physically damaged or a cable run is re-terminated.

What limit shows up first under sustained use?

The 0.35 mm ± 0.02 mm contact thickness and 1.10 mm hole diameter set the mechanical tolerance; repeated re-crimping or excessive strain on solid 24–26 AWG conductors will degrade the connection before the plating wears.

More in Ethernet & LAN Cables

Similar items