BFKK PSU Cable Extension Kit 30cm White 1x24Pin 1x8Pin 2x8Pin with Combs
White sleeved extension kit with 24-pin ATX, 8-pin EPS and two 8-pin PCIe cables, each 30 cm long and fitted with cable combs for tidy routing
- Product colorWhite
Color White
- Complete ATX, EPS and dual PCIe extensions in one kit
- 30 cm length per cable for flexible routing
- Triple-layer woven sleeve with soft silicone for easy shaping
- Acrylic cable combs included for clean, aligned runs
- 16 AWG pure copper tinned conductors for stable current delivery
Cable kit contents and purpose
This extension kit bundles a 24-pin ATX motherboard cable, one 8-pin EPS cable and two 8-pin PCIe cables, each 30cm long. White sleeving and included acrylic combs give a clean, uniform look for builders who want a tidy interior without replacing the power supply.
Current handling under sustained load
The cables use 16AWG pure copper tinned conductors rated for stable current delivery across all included connectors. Thicker wire reduces resistance so voltage drop stays low even when the system draws full power for extended periods.
Thermal and acoustic behaviour
No active cooling components are present, so the kit adds no noise and negligible heat to the build. Flexible triple-layer woven silicone insulation routes easily around tight bends without kinking, keeping airflow paths clear for the power supply fan.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $35.99
- Pricier than about 76% of the 7,839 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product color | White |
Other versions of this model
3 more in the same range
Questions about this item
Do the 16AWG cables run hot when the system draws full load all day?
The 16AWG pure copper tinned wire is rated for stable overcurrent, so the extensions stay cool even under continuous heavy load.
What power-supply connectors must I already have for this kit to plug in?
You need a standard 24-pin ATX, an 8-pin (4+4) EPS and two 8-pin (6+2) PCIe outputs on the PSU.
Will the 30 cm extensions reach cleanly in a full-tower case with the PSU at the bottom?
At 30 cm each cable adds enough length to route behind the motherboard tray in most full-tower layouts.
More in Internal PSU & Riser Cables
Similar items
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
SXDOOL 10-Pack PCIe 8-Pin Female to Dual 6+2-Pin Male Splitter Cable 18AWG 20cm
STARTECH LP4PCIEX8ADP 6.1 in LP4 to 8 Pin PCIe Power Cable Adapter
- 6.1 in (15.5 cm)
- Cable Connectors
Ruth's sister CXA-0420 PCU-P213C LCD Inverter internal power cable
STARTECH TX3SPLITTER 6.1 in TX3 Fan Power Splitter Cable
- 0.5 ft (0.15 m)
- Cable Connectors








