We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four shielded RJ45 connectors with zinc alloy housings and tool-free strain relief boots

BFKK

BFKK RJ45 Cat6A Shielded Tool-Free Connectors 4 Pack

SKU CH-RE93-PKWH6

Tool-free shielded RJ45 plugs terminate 22-24 AWG cable for 10 Gbps Cat6A links, reusable and PoE+ compliant

  • Tool-free installation without crimping tools required
  • Reusable nut-type strain relief boot for easy disassembly
  • Supports 22-24 AWG solid or stranded wire up to 8.5mm OD
  • Cat6A 500MHz bandwidth for 10GBase-T speeds
  • Full zinc alloy shielded housing reduces alien crosstalk

Tool-Free Cat6A RJ45 Connectors

These shielded RJ45 plugs terminate Cat6A solid or stranded cable from 22 to 24 AWG without a crimper. The screw-on strain relief accepts jacket diameters up to 8.5 mm and meets 500 MHz bandwidth for 10GBASE-T links. Gold-plated IDC contacts follow T568A or T568B wiring. Four connectors per pack suit installers and DIY network builds.

Shielded Housing and Thermal Behaviour

The solid zinc-alloy shell provides continuous shielding that suppresses alien crosstalk across the 500 MHz passband. No active cooling is involved so the connector adds no noise and draws no power. PoE+ compliance under IEEE 802.3 at allows the plug to carry powered-device current without temperature rise beyond normal cable heating. The PC body and metal boot maintain signal integrity at typical rack or wall-plate ambient conditions.

Sustained 10GBASE-T Operation

Under continuous 10 Gbps throughput the shielded construction keeps insertion loss and return loss within Cat6A limits. The tool-free IDC termination resists vibration-induced contact degradation better than crimped plugs in patch-panel or field-termination scenarios. Reusable nut-type boot permits re-termination if a wire map error is found during certification testing. Not suited for cables thicker than 8.5 mm OD or conductors outside the 1.02 to 1.4 mm insulated range.

How it compares

Measured against everything we stock in Ethernet & LAN Cables, at today’s prices. Recalculated every night.

Price $26.99
Pricier than about 72% of the 9,945 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the tool-free RJ45 connector without a crimper, and what step do people usually skip?

Strip the cable jacket, arrange wires in the T568A or T568B colour code, insert into the IDC modules, then tighten the screw-on metal strain-relief boot to 8.5 mm cable OD; the step often missed is fully seating each wire before tightening the nut.

What maintenance or replacement will these shielded Cat6A plugs need over time?

The gold-plated contacts and zinc-alloy housing are rated for repeated mating cycles; under normal use no scheduled replacement is needed, but inspect the strain-relief boot threads if the cable is frequently moved.

What is the first performance limit I will hit on a sustained 10 Gbps PoE+ link?

The connector supports 500 MHz bandwidth and 10GBASE-T speeds with IEEE 802.3at PoE+; the practical limit is the 22–24 AWG wire gauge and 1.02–1.4 mm conductor OD range, which governs voltage drop and heating on long runs.

More in Ethernet & LAN Cables

Similar items