BIWIN STORAGE TECHNOLOGY LIMITED 16GB MLC 2.5" SATA internal SSD
- 16 GB
- SATA III
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
BIWIN STORAGE TECHNOLOGY LIMITED
A 2.5 inch SATA internal SSD with 256GB of MLC flash delivering sequential reads up to 561MB/s and writes up to 452MB/s
Capacity 256GB
This 2.5-inch internal solid-state drive uses MLC flash and a SATA III interface to deliver 561MB/s read and 452MB/s write speeds. It targets everyday computing workloads such as operating-system boots, application launches and general file storage. The 7mm height fits standard laptop and desktop drive bays.
At 256GB the drive holds a mainstream operating system, core applications and a working set of documents with room for updates. MLC memory provides higher write endurance than entry-level alternatives, while BCH ECC 66 bits/1KB protects data integrity. Active power draw reaches 2.94W and idle drops to 0.25W.
The SATA III link caps sequential throughput at the stated 561MB/s read and 452MB/s write, so heavier workloads such as sustained 4K video editing or large database writes will saturate the bus. Operating temperature ranges from 0°C to 70°C and shock tolerance is rated at 50G for 11ms half-sine events.
Measured against everything we stock in Internal NVMe & SATA SSDs, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | BIWIN |
| Total capacity | 256 GB |
| Product type | Internal Solid State Drive (SSD) |
| Storage | |
| NAND flash type | MLC |
| Ports & slots | |
| Interface type | SATA III |
| Power | |
| Idle power draw | 0.25 W |
| Active power draw | 2.94 W |
| Size & build | |
| Form factor | 2.5 in (6.35 cm) |
| Overall height | 100.2 mm |
| Overall width | 69.8 mm |
| Product depth | 7.0 mm |
| Product weight | =80g |
| Environment & compliance | |
| Operating temperature range | 0 °C to 70 °C |
| Storage temperature range | -40 °C to 85 °C |
| Operating humidity range | 5% to 95% |
| Max shock tolerance | 50G,11 ms, half-sine wave |
| Vibration tolerance | 3.1G(2-500 Hz) 3.9 |
Other versions of this model
The drive is SATA 6Gb/s and backward compatible with SATA 3Gb/s, so it will work on your older board at the slower link speed.
Run a sequential benchmark such as CrystalDiskMark; the drive should report speeds near 561MB/s read and 452MB/s write on a SATA 6Gb/s port.
The package contains only the 2.5" 7mm drive; brackets, screws and software must be purchased separately.
More in Internal NVMe & SATA SSDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?