VCE SJ661-100P-CA Cat6 RJ45 Pass Through Connectors 100-Pack
- Ethernet, Male
- Unshielded, Male
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 7 ft Cat6a slim patch cable with 28 AWG stranded conductors, gold-plated RJ-45 connectors and 10 Gbit/s data transfer rate
This Cat6a patch cable carries 10 Gbit/s over a 7 ft run with RJ-45 male connectors on both ends. The 28 AWG stranded conductors keep the cable slim and flexible for tight rack or desk routing. Gold-plated contacts and a snagless boot protect the connection during repeated moves. It suits installers who need high-speed links in dense cable trays.
Stranded 28 AWG construction maintains the 10 Gbit/s data rate across the full length without the signal drop-off seen in thinner or longer runs. The CM-rated jacket resists damage while the strain-relief boot absorbs bend stress at the connector. Near-end crosstalk performance stays within Cat6a limits during continuous heavy traffic. Builders who need shielded cable for noisy industrial environments should choose a different type.
The 28 AWG gauge is the single spec that decides fit: it determines the cable’s outer diameter, bend radius and maximum safe pull tension. Thicker gauges will not route through the same tight openings; thinner gauges cannot guarantee the 10 Gbit/s rating at this length. Verify that your patch panels and wallplates accept 28 AWG terminations before ordering.
Measured against everything we stock in Network Adapters & RJ45 Plugs, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | BLACK BOX CORPORATION |
The 28 AWG stranded conductors are sized for Cat6a 10 Gbit/s operation; under normal indoor use the cable runs at ambient temperature with no active cooling required.
Both ends terminate in RJ-45 male connectors, so the switch, router, patch panel, wallplate or network device you are linking must each provide a standard RJ-45 jack.
Yes, the RJ-45 plugs are backward-compatible with Cat5e and Cat6 panels; the snagless boot simply protects the latch during repeated insertion and removal.
More in Network Adapters & RJ45 Plugs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?