Ring Chime Pro 2.4 5GHz 2000 sq ft surveillance accessory
- Extend your Wi-Fi t…
- Melody/Tune, Lighte…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Four-channel active video receiver transmits surveillance signals over UTP cable with 60 dB common-mode rejection and 6 kV transient protection
The Bluecctv BL-EV04AR is a four-channel active video receiver designed for surveillance installations that run video over twisted-pair cabling. It accepts 24AWG UTP CAT5 or higher wire and converts the balanced signal back to a standard 75O BNC output for recording or display equipment.
Passive baluns rely on the camera’s own driver and lose clarity beyond short runs. This active unit provides 60dB common-mode and differential-mode rejection from 15KHz to 6MHz and transient protection rated at 6KV 10 x 700 us to IEC61000-4-5, making the jump worthwhile when cable lengths approach the 100O UTP loop-resistance limit or when interference is present.
Installers running up to four cameras over a single CAT5 backbone will appreciate the 12V DC input drawing under 300mA and the compact 120 x 83 x 32mm form factor. Buyers who need power-over-cable delivery, fibre conversion, or more than four channels should look at alternative distribution hardware.
Measured against everything we stock in Camera Mounts & Add-Ons, at today’s prices. Recalculated every night.
| Product | |
|---|---|
| Brand name | Bluecctv |
| Model name | BL-EV04AR |
Each channel uses 24AWG UTP CAT5 or higher cable with a DC loop resistance of 18 ohms per 100 metres and differential capacitance of 62pF per metre maximum.
The receiver runs on 12V DC drawing under 300mA; verify the centre-positive barrel connector polarity before applying power to avoid damage.
The 6KV 10 x 700 us IEC61000-4-5 protection is non-resettable; inspect the unit and replace it if a surge exceeds the rated threshold.
More in Camera Mounts & Add-Ons
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?