BUCIER 8K Mini DisplayPort to DisplayPort 1.4 Down Angled Cable 0.3m

Connection & Compatibility

This 0.3-metre cable carries a Mini DisplayPort male plug on one end and a full-size DisplayPort male plug on the other. It is rated for DisplayPort 1.4a and supports bi-directional transmission at up to 32.4 Gbps. The link handles 8K at 60 Hz (7680×4320) and 4K at 144 Hz (3840×2160) while remaining backward compatible with earlier DisplayPort devices. It is aimed at users connecting a Mini DisplayPort source such as a laptop or workstation to a standard DisplayPort monitor or television.

Installation Notes

The connectors are moulded at a downward angle to reduce strain in tight rear-panel spaces. Gold-plated contacts and multiple foil shields aim to keep the signal stable, and the oxygen-free copper conductors are designed for low loss. Plug-and-play operation means no driver or software installation is required. The short 0.3-metre length leaves almost no slack, so the source and display must sit very close together; routing the cable around other ports or cable-management bars can be difficult.

Pre-Purchase Checks

Verify that your source device has a Mini DisplayPort output and your display has a full-size DisplayPort input; the cable will not fit standard DisplayPort or USB-C ports without an adapter. Confirm that both devices support the resolution and refresh rate you need, as the cable cannot exceed the capabilities of the connected hardware. Ensure the 0.3-metre reach is sufficient for your desk layout, because the fixed length cannot be extended and the angled plugs may block adjacent ports on densely packed I/O panels.