BUCIER USB 3.0 19/20-pin to 2×USB-A front panel cable 50cm
Converts a motherboard 19/20-pin header into two front-panel USB 3.0 Type-A ports with 50 cm shielded cable
- Connection typeUSB Type A
- Connector detailsUSB Type A
- Build detailsCopper
- Adds two USB 3.0 Type-A ports from a single 19/20-pin motherboard header
- Supports up to 5 Gbps transfer speed with twisted-pair conductors
- Shielded with inner membrane, woven copper mesh and aluminium for stable data
- 50 cm flexible PVC cable resists breakage for reliable front-panel installs
- Works with Windows XP through 8 (32/64-bit) and macOS 10.8+
Front-panel USB 3.0 adapter
This 50 cm cable converts a motherboard 19/20-pin header into two USB 3.0 Type-A ports for a PC case front panel. It suits DIY builders who need to add modern USB connectivity to an older chassis or replace a damaged front-panel header. The assembly uses copper conductors with twisted-pair data lines and shielded construction.
Shielding and signal quality
Twisted-pair data conductors provide impedance matching to minimise crosstalk at USB 3.0 speeds. Inner membrane shielding plus an outer woven copper mesh and aluminium-platinum layer reduce electromagnetic and radio-frequency interference for stable transfers. The PVC jacket is rated for flexibility and durability in normal case routing.
Sustained transfer behaviour
The cable supports up to 5 Gbps when connected to a USB 3.0 header and USB 3.0 devices; it falls back to USB 2.0 speeds if plugged into a USB 2.0 port. No active circuitry is present, so performance depends entirely on the host controller and attached peripherals. It is not a power-delivery or charging cable.
How it compares
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
- Price $15.99
- Pricier than about 55% of the 15,227 comparable items (median $14.99).
Specifications
| Product | |
|---|---|
| Brand name | XMSJSIY |
| Ports & slots | |
| Connection type | USB Type A |
| Connector details | USB Type A |
| Size & build | |
| Build details | Copper |
Questions about this item
How do I connect the 19/20-pin header to my motherboard and which mistake should I avoid?
Align the keyed 19/20-pin plug with the motherboard USB 3.0 header and press straight in; the common error is forcing it upside-down, which bends pins.
What upkeep will the 50 cm cable and its two USB-A ports need over time?
Inspect the PVC jacket and woven copper shielding for cuts, keep the female ports dust-free with compressed air, and reseat the header if connections become intermittent.
What limits sustained transfer speed on this 5 Gbps link first?
The 50 cm length and twisted-pair construction support the full 5 Gbps, so the bottleneck is the host controller or attached device, not the cable itself.
More in USB Cords & Extension Cables
Similar items
ESTONE PQ001 USB4 Gen 3x2 Cable 5 ft Copper 240W 40Gbps 8K@60Hz
- USB C to USB C
- USB4
STARTECH UUSBHAUB6LA USB 2.0 A to Left Angle Micro USB B Cable
- USB A to Micro USB
- USB 2.0
ESTONE TJ-A323 USB4 cable 6.6ft 40Gbps 100W 8K@60Hz
- USB C to USB C
- USB4
STARTECH USB3SEXT1M USB 3.0 extension cable 3.28 ft
- USB A to USB A
- Data Transfer Cable
Jansicotek USB4 usb cable 3.3Ft 40Gbps 240W 8K@60Hz
- USB C to USB C
- USB4





