BUCIER USB 3.1 Header Male to USB-C Female Extension Cable 50cm with Back Panel Mount Bracket
Connects a motherboard USB 3.1 header to a rear-panel USB-C port using a 50 cm cable and mounting bracket
- Connection typeMicro USB to Mini USB
- Adds a USB-C port to the motherboard header
- 50 cm cable reaches rear-panel cut-outs
- Back-panel bracket secures the female connector
- Compatible with USB 3.0 pin layout
- Designed for early USB 3.1 header boards
USB 3.1 Header to USB-C Adapter
This cable connects a motherboard USB 3.1 header to a USB-C female port mounted on a rear bracket. It suits builders adding a Type-C port to a case back panel or test bench. The 50 cm length fits most ATX and micro-ATX layouts.
Compatibility Check
Verify that your motherboard exposes a USB 3.1 front-panel header; USB 3.0 headers are not electrically identical. The supplier notes that USB 3.1 uses the USB 3.0 pin set plus additional pins and that official header specifications were not finalised at time of writing. Early boards with this header include Z270 models such as the ROG Maximus IX Formula and Strix Z270I or Z270G.
Thermals Noise Power
The adapter is a passive cable assembly with no active components, so it generates no measurable heat or noise. Power delivery follows the host header specification without additional draw. No fan, radiator or external power connection is involved.
How it compares
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
- Price $15.99
- Pricier than about 55% of the 15,227 comparable items (median $14.99).
Specifications
| Ports & slots | |
|---|---|
| Connection type | Micro USB to Mini USB |
Questions about this item
Does the cable include the back-panel bracket or must I source one separately?
The package contains one cable with a USB-C female port already mounted on a back-panel bracket, so no extra bracket is needed.
My motherboard has a USB 3.0 header — can I use this 3.1 header cable with it?
The cable plugs into a motherboard USB 3.1 header; the supplier notes the 3.1 header uses the USB 3.0 pin set plus more and is designed to be backwards compatible.
Will the 50 cm length reach from a bottom-edge header to a rear I/O cut-out in a full-tower case?
At 50 cm the cable spans roughly half a metre, which typically covers the run from a lower motherboard header to a rear expansion slot in most full-tower chassis.
More in USB Cords & Extension Cables
Similar items
STARTECH UUSBHAUB6LA USB 2.0 A to Left Angle Micro USB B Cable
- USB A to Micro USB
- USB 2.0
ESTONE PQ001 USB4 Gen 3x2 Cable 5 ft Copper 240W 40Gbps 8K@60Hz
- USB C to USB C
- USB4
STARTECH USB3SEXT1M USB 3.0 extension cable 3.28 ft
- USB A to USB A
- Data Transfer Cable
ESTONE TJ-A323 USB4 cable 6.6ft 40Gbps 100W 8K@60Hz
- USB C to USB C
- USB4





