BUCIER USB 9-Pin Header to USB-C Adapter Cable 50cm 2PCS
Two 50 cm shielded cables convert a motherboard 9-pin USB header to a USB-C port for internal devices
- Connection typeUSB Type C
- Connector count13
- Connector detailsUSB Type C
- Connector genderMale-to-Female
- Product typeUSB
- Key featuresLow Voltage
- Connects motherboard 9-pin header to USB-C port
- Tinned copper conductor with double shielding reduces signal loss
- 50 cm length fits internal chassis routing
- Plug-and-play design requires no drivers or configuration
- Two cables included for multiple internal connections
Internal USB-C Upgrade
This adapter converts a motherboard or graphics-card 9-pin USB header into a standard USB-C port using a 50 cm 26AWG shielded cable. It targets builders adding front-panel USB-C connectivity or routing internal Type-C devices such as lighting controllers and card readers. Two cables are included for dual-header installations.
Shielded Build and Pin-Out
Tinned-copper conductors and double shielding reduce signal attenuation across the 1.6 ft length. The DuPont 4-pin female connector follows a fixed red V+, white D-, green D+, black GND sequence from the red end, so incorrect insertion is avoided by checking orientation before power-up. Plug-and-play operation requires no drivers or BIOS changes.
Header-Bound Bandwidth
The link is limited by the host header’s USB specification; no faster signalling is added by the adapter itself. Length and wire gauge cap practical throughput to whatever the motherboard or graphics-card header already delivers. Buyers needing higher internal bandwidth or additional independent ports must address those constraints at the header level.
How it compares
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
- Price $15.99
- Pricier than about 55% of the 15,227 comparable items (median $14.99).
Specifications
| Product | |
|---|---|
| Brand name | XMSJSIY |
| Product type | USB |
| Ports & slots | |
| Connection type | USB Type C |
| Connector count | 13 |
| Connector details | USB Type C |
| Connector gender | Male-to-Female |
Questions about this item
What USB standard does the 9-pin header on this cable support?
The cable connects a motherboard USB 9-pin header to a USB Type-C port using 26AWG shielded wire with tinned copper conductors for stable data transmission.
What clearance and pin layout does the DuPont connector need?
The DuPont 4-pin female connector follows a red V+, white D-, green D+, black GND pin order starting from the red end and requires a standard 9-pin header on the motherboard or graphics card.
How do I install the cable without reversing the DuPont pins?
Align the red wire to the V+ pin on the 9-pin header, then plug the USB Type-C end into the device; the 50 cm length gives enough slack to route inside the chassis.
More in USB Cords & Extension Cables
Similar items
ESTONE PQ001 USB4 Gen 3x2 Cable 5 ft Copper 240W 40Gbps 8K@60Hz
- USB C to USB C
- USB4
STARTECH UUSBHAUB6LA USB 2.0 A to Left Angle Micro USB B Cable
- USB A to Micro USB
- USB 2.0
ESTONE TJ-A323 USB4 cable 6.6ft 40Gbps 100W 8K@60Hz
- USB C to USB C
- USB4
STARTECH USB3SEXT1M USB 3.0 extension cable 3.28 ft
- USB A to USB A
- Data Transfer Cable
Jansicotek USB4 usb cable 3.3Ft 40Gbps 240W 8K@60Hz
- USB C to USB C
- USB4





