Bussmann JM60030-3PR line protection 30A 600V 3 poles 3.3 in
- Circuit Breakers
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Pack of five 20 mm glass time-delay fuses rated 125 mA at 250 V AC with 10 kA interrupt at 125 V and 35 A at 250 V
The Bussmann GMC-125-R is a glass-bodied time-delay fuse rated at 125 mA and 250 V AC. It protects sensitive electronics and control circuits from overcurrent damage. The cylindrical 20 mm by 5 mm body fits standard HTB fuse blocks. A pack of five provides spares for maintenance or field replacement.
The fuse interrupts 10 kA at 125 V AC and 35 A at 250 V AC. Select this part only when the prospective short-circuit current at the point of use does not exceed those values at the corresponding voltage. Exceeding the interrupt rating can cause the fuse to rupture rather than clear the fault safely.
Insert the fuse into a compatible HTB holder until it seats firmly in the clips. The non-rejection design means it fits any 20 mm by 5 mm clip without a keying feature. The most common error is using a fuse with a lower interrupt rating than the circuit can deliver, which risks violent failure under fault conditions.
Measured against everything we stock in Breakers & Circuit Protection, at today’s prices. Recalculated every night.
| Product | |
|---|---|
| Brand name | EATON BUSSMANN |
The fuse will carry up to 125mA continuously and open after a time delay if the current exceeds that value, protecting downstream components from sustained overloads.
It defines the maximum prospective short-circuit current the fuse can safely interrupt at each voltage; above those limits the fuse may not clear the fault safely.
It fits standard 5x20mm fuse clips or holders such as the HTB series block; the glass body is 20mm long and 5mm in diameter with no rejection feature.
More in Breakers & Circuit Protection
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?