Bussmann GMD-2.5-R Glass Fuse 2.5 A 250 V AC Time-Delay 20×5 mm Pack of 5

Time-Delay Glass Fuse 2.5 A 250 V AC

This pack contains five Bussmann GMD-series glass fuses rated at 2.5 amps and 250 volts AC. Each fuse measures 20 mm long by 5 mm in diameter with a cylindrical glass body. The time-delay characteristic allows brief current surges without nuisance blowing. They carry a 100 A interrupt rating at 250 V AC and a 10 kA rating at 125 V AC.

Circuit protection for low-current equipment

Suitable for technicians and hobbyists protecting control circuits, instrumentation or small appliances that require a 2.5 A time-delay fuse. The non-rejection design fits standard HTB-series fuse blocks and similar holders. Buyers who need a higher current rating, a fast-acting response or a ceramic body should look at other parts.

20 × 5 mm cylindrical glass body

The 20 mm length and 5 mm diameter determine whether the fuse fits the holder or block in your equipment. Verify these dimensions against the device specification before ordering. The glass construction also lets you visually inspect the element after a fault.