We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue 15 ft Cat6 shielded Ethernet cable with snagless RJ45 connectors

C2G-Kvm & Networking

C2G-Kvm & Networking 00803 15 ft Cat6 STP Snagless Blue network ethernet cable

SKU CH-6AP0-TC5F9

A 15 ft shielded Cat6 patch cable with snagless RJ-45 connectors, tested to ANSI/TIA 568 C.2 component requirements for reliable high-speed network connections

  • Cable categoryCategory 6
  • First connector1 x RJ-45 Male Network
  • Second connector1 x RJ-45 Male Network
  • Product typeCategory 6
  • Overall length15 ft (4.57 m)
  • Product colorBlue
  • Shielded construction blocks electromagnetic interference in noisy environments
  • Snagless boot protects the RJ-45 latch during frequent reconnections
  • Meets ANSI/TIA 568 C.2 Cat6 component requirements for reliable gigabit performance
  • Bonded pair design maintains twist spacing to the termination point reducing crosstalk
  • 15 ft length suits typical desk-to-switch or patch-panel runs

15 ft Shielded Cat6 Patch Cable

This 15 ft shielded Category 6 patch cable uses RJ-45 male connectors on both ends. The snagless boot protects the locking tab during frequent moves. Each pair is bonded to preserve twist spacing to the termination point. The cable is tested to ANSI/TIA 568 C.2 component requirements.

Shielded Runs For Noise Sensitive Installs

Suited for installers who need shielded cabling to reject electromagnetic interference in voice, data or video distribution. The blue jacket allows colour coding in structured wiring. Builders who need unshielded UTP cable, a different length or a non-snagless boot should select another product.

Snagless Boot And Bonded Pair Construction

The snagless boot prevents tab breakage when pulling through cable management. Bonded pairs keep twist geometry consistent to the connector, reducing near-end crosstalk and structural return loss. This construction detail determines whether the cord meets component-level Cat6 performance in dense patch panels.

How it compares

Measured against everything we stock in Ethernet & LAN Cables, at today’s prices. Recalculated every night.

Price $16.99
Pricier than about 55% of the 9,945 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameC2G
Product typeCategory 6
Product colorBlue
Connectivity
Cable categoryCategory 6
Ports & slots
First connector1 x RJ-45 Male Network
Second connector1 x RJ-45 Male Network
Size & build
Overall length15 ft (4.57 m)

Questions about this item

Should I choose a 15 ft shielded Cat6 cable or a different length for my switch-to-router run?

Pick the 15 ft length when the distance between patch panel and device falls near that mark; the snagless boot protects the latch during frequent moves.

What does the Cat6 rating actually deliver when the cable is plugged into my gigabit switch?

The cable meets ANSI/TIA 568 C.2 component requirements, so it supports full gigabit throughput with reduced NEXT and structural return loss.

Does the RJ-45 connector work with standard keystone jacks and PoE gear?

Yes, each end uses a standard RJ-45 male plug compatible with any 8P8C port, including PoE switches and HDBaseT extenders.

More in Ethernet & LAN Cables

Similar items