Cable Leader 10ft Cat6 Slim Ethernet Cable 28AWG Blue 3.6mm

Ultra-Slim 3.6mm Cat6 Patch Cable

This 10ft Cat6 Ethernet cable uses a 3.6mm diameter jacket and 28AWG stranded bare copper conductors to deliver Gigabit speeds at 250MHz. The slim profile fits high-density patch panels, wall plates and tight behind-desk spaces where standard cables crowd airflow. Gold-plated 50-micron contacts on each RJ45 plug resist corrosion and maintain signal integrity over repeated insertions. Backward compatibility with Cat5e lets it drop into existing networks without hardware changes.

Simple RJ45 Installation With Snagless Boot

Each end terminates in an 8P8C RJ45 plug protected by a transparent slim snagless boot that shields the locking clip during routing and re-patching. The flexible 28AWG stranded construction bends easily around corners and through cable management channels without kinking. A 4-pair spline core keeps twisted pairs separated to reduce crosstalk in dense bundles. No tools are required — just push the connectors into routers, switches, keystone jacks, PCs, consoles or smart TVs until the clip clicks.

Verify Port Spacing And Bend Radius First

Confirm that your patch panel or keystone jack spacing accommodates the 3.6mm jacket diameter when multiple cables sit side by side. Check that the minimum bend radius of the 28AWG stranded conductors suits the routing path behind desks or inside wall cavities. Ensure the connected devices use standard RJ45 ports — the cable does not fit proprietary or locking industrial connectors. The C6116 family offers additional lengths and ten colors if you need zone or port labeling.