Cable Leader 36in NEMA 5-15P to 2x 5-15R Power Splitter Cord 14 AWG 15A 125V Black
- 14 AWG
- Black
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 6-foot Y-splitter powers two devices from one outlet using 16 AWG grounded cable rated at 13 amps and 125 volts with UL and CSA certification
Length 6ft
This 6 ft NEMA 5-15P to dual 5-15R splitter powers up to two devices from a single outlet. It uses 16 AWG SJT-jacketed copper rated at 13A and 125V with full three-wire grounding. The molded connectors include strain relief for durable connections. UL Listed and CSA certified under file E210037, it meets RoHS compliance standards.
Confirm your wall or PDU receptacle accepts a standard 5-15P plug before ordering. Add the amperage of both connected devices and keep the combined draw at or below 13A to stay within the cord rating. Verify each device uses a 5-15P plug so it fits the 5-15R outlets on the splitter. Ensure the six-foot length reaches your equipment without tension on the cable.
Suits home or office setups where a PC and monitor share one outlet. Works for low-draw peripherals like printers, speakers or chargers that use 5-15P plugs. Not for equipment requiring more than 13A total or for 20A circuits needing 12 AWG cable. Buyers needing three or more outlets should consider a power strip instead.
Measured against everything we stock in Y-Splitter Power Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Product type | Power Splitter |
| Product color | Black |
| Ports & slots | |
| Connector count | 2 |
| Connector gender | Male to Male |
| Size & build | |
| Overall length | 6 ft (1.83 m) |
| Conductor gauge | 16 AWG |
Other versions of this model
The cord has one 5-15P plug and two 5-15R sockets moulded on a 6 ft SJT cable. No extra parts are needed — just plug it into a standard outlet and connect up to two devices.
Choose 16 AWG when the combined draw of both devices stays at or below 13 A at 125 V — typical for PCs and monitors. Use 18 AWG only for lighter loads up to 10 A, and step up to 14 AWG or 12 AWG for 15 A or 20 A equipment.
The 13 A limit applies to the total current drawn by both connected devices together. As long as their combined load does not exceed 13 A at 125 V, the 16 AWG SJT cable and UL-listed connectors will operate within their 105 °C / 300 V design rating.
More in Y-Splitter Power Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?