We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray Cat6 Ethernet patch cable with snagless RJ45 connectors, 25 ft length

Cables To Go

Cables To Go 27135 Cat6 network ethernet cable 25 ft 7.62 m

SKU CH-CFQT-7YXYT MPN 27135

A 25-foot Cat6 patch cable with snagless RJ45 connectors rated for 550 MHz bandwidth

  • Cable category6
  • First connectorRJ45 Male
  • Second connectorRJ45 Male
  • Product typeNetwork Cable
  • Overall length25 ft (7.62 m)
  • Product colorGray
  • Handles bandwidth-intensive voice, data and video applications up to 550 MHz
  • Meets Cat6 TIA/EIA-568-B-2.1 draft 9 standards for reliable performance
  • Bonded pair construction maintains twist spacing to the termination point
  • Snagless molded boot prevents cable snags and adds strain relief
  • 25 ft / 7.62 m length with RJ45 male connectors on both ends

25-foot Cat6 patch cable

This 25-foot Cat6 patch cable connects network devices with RJ45 male connectors on both ends. It supports voice, data and video distribution for bandwidth-intensive applications up to 550 MHz. The gray jacket uses unshielded twisted-pair construction bonded to maintain twist spacing to the termination point. Molded snagless boots prevent cable snags and provide strain relief during installation.

Home and small-office installers

The cable suits home and small-office installers who need a reliable 25-foot run for gigabit Ethernet, IP cameras or VoIP phones. Builders requiring shielded cable for high-EMI environments, plenum-rated jackets for air-handling spaces, or runs longer than the supplied length should look at alternative products.

Category 6 TIA/EIA-568-B-2.1 compliance

The single specification that decides fit is Category 6 compliance with TIA/EIA-568-B-2.1 draft 9, which guarantees performance up to 550 MHz and reduced impedance and structural return loss. If your project demands Cat6a or higher bandwidth ratings, this cable will not meet that requirement.

How it compares

Measured against everything we stock in Ethernet & LAN Cables, at today’s prices. Recalculated every night.

Price $19.99
Pricier than about 62% of the 9,945 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameC2G
Model name27135
Product typeNetwork Cable
Product colorGray
Connectivity
Cable category6
Ports & slots
First connectorRJ45 Male
Second connectorRJ45 Male
Size & build
Overall length25 ft (7.62 m)
Shipping weight0.32 kg
Package size178 × 165 × 32 mm

Questions about this item

Will the 25 ft Cat6 cable with RJ45 connectors reach from my wall jack to a desktop across a standard room?

The cable is 25 ft (7.62 m) long with RJ45 male connectors on both ends, which is sufficient for typical room‑scale runs between a wall outlet and a computer or switch.

How do I install the snagless‑boot Cat6 patch cable without damaging the latch?

Align the RJ45 plug with the port, push straight in until the snagless boot clicks, and pull the cable body — not the boot — when removing it to avoid breaking the latch.

When should I replace this 550 MHz Cat6 patch cable?

Replace it if the boot cracks, the latch fails to hold, connectors show corrosion, or you experience persistent link errors that a known‑good cable resolves.

More in Ethernet & LAN Cables

Similar items