Monoprice Inc. 140885 Flat Cat6 Network Ethernet Cable 10 ft Black 30AWG 550MHz
- Networking Patch Ca…
- 10 ft (3.05 m)
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 20 metre single-mode duplex fibre patch lead with LC connectors in a yellow PVC jacket
The Cables To Go 37465 is a 20-metre OS1/OS2 single-mode fibre patch cable with LC duplex connectors on each end. It is built for long-distance network links in enterprise, campus or data-centre environments where copper reach is insufficient. The yellow PVC jacket identifies the single-mode fibre type at a glance.
The 9/125 micron core/cladding geometry supports standard single-mode wavelengths and provides low attenuation over the full 20-metre length. It comfortably handles gigabit and multi-gigabit Ethernet, Fibre Channel and other protocols that specify OS1/OS2 cabling. The fixed 20-metre length means installers must plan exact routing; slack cannot be trimmed without re-termination.
Each end uses a push-pull LC duplex connector, so the patch panel or transceiver must present matching LC ports. The duplex housing occupies two adjacent fibres, limiting density compared with newer small-form-factor alternatives. The PVC jacket is not rated for plenum or riser spaces, restricting use to general-purpose indoor pathways.
Measured against everything we stock in Ethernet & LAN Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | C2G |
| Product type | Consumer Electronics |
| Product color | Black |
| Size & build | |
| Shipping weight | 0.13 kg |
| Package size | 210 × 171 × 19 mm |
Yes, the cable meets OS1 and OS2 specifications so it will connect to standard OS1 patch panels using the same LC duplex connectors.
Connect both ends, then check the link lights on your transceivers; a steady green indicator confirms the single-mode path is live.
The cable ships with protective dust caps on each LC connector; cleaning wipes are not included and must be purchased separately.
More in Ethernet & LAN Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?