We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow 30 m duplex fiber patch cable with LC connectors on both ends

Cables To Go

Cables To Go 37466 30 m LC/LC Duplex 9/125 Single Mode network ethernet cable

SKU CH-90K8-Z9SQC MPN 37466

A 30-metre yellow single-mode fibre patch cord with LC duplex connectors for gigabit ethernet links

  • First connectorLC Male
  • Second connectorLC Male
  • Product typeFiber Optic
  • Overall length30 m
  • Product colorYellow
  • Key features9/125 micron cable for gigabit ethernet applications LC Conn
  • 30-metre reach links distant network nodes
  • LC duplex connectors enable quick, secure mating
  • 9/125 micron core supports gigabit ethernet speeds
  • Yellow jacket simplifies cable identification in racks
  • OFNR-rated PVC jacket meets riser installation requirements

Single-mode fibre patch cable

The Cables To Go 37466 is a 30 m yellow duplex patch cord built with 9/125 µm single-mode fibre and terminated with LC male connectors on both ends. It is designed for gigabit ethernet links that require the reach and low loss of single-mode cabling. The OFNR riser-rated PVC jacket meets indoor vertical-run requirements.

Installers needing 30 m OS2 duplex jumpers

This cable suits installers who need a factory-terminated 30 m OS2 duplex jumper with LC connectors for campus, metro or data-centre single-mode runs. It does not suit buyers who need multimode fibre for shorter-reach LAN segments, nor those who require SC, ST or MTP terminations. The fixed 30 m length also makes it unsuitable for runs that demand a different reach.

9/125 µm single-mode fibre core

The 9/125 µm core diameter is the specification that determines whether this patch cord matches the link design. Single-mode cores support the long-distance, low-attenuation performance required for OS2 channels, while multimode cores do not. Verify that your transceivers and link budget are specified for 9/125 µm single-mode fibre before ordering.

How it compares

Measured against everything we stock in Ethernet & LAN Cables, at today’s prices. Recalculated every night.

Price $35.99
Pricier than about 80% of the 9,945 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameC2G
Model name37466
Product typeFiber Optic
Product colorYellow
Ports & slots
First connectorLC Male
Second connectorLC Male
Size & build
Overall length30 m
Shipping weight0.23 kg
Package size165 × 152 × 13 mm

Questions about this item

What does the 9/125 micron single-mode specification mean for gigabit ethernet distance limits?

The 9/125 micron single-mode fiber supports gigabit ethernet over much longer distances than multimode, with attenuation of 0.35 dB/km at 1310 nm and 0.25 dB/km at 1550 nm, making this 30 m patch cable well within reach for campus or building links.

What physical space do the LC duplex connectors need behind the patch panel?

Each LC connector measures 10.75 mm by 12.5 mm by 50 mm with the installed duplex clip, and the 1.8 mm jacket OD means you need at least 5.0 cm bend radius under load or 3.0 cm unloaded to avoid signal loss.

How do I install the cable without exceeding the bend radius during the first run?

Pull with no more than 100 N (445 lbs) tensile load, keep every bend wider than 5.0 cm while the cable is under tension, and secure it so the long-term bend radius stays above 3.0 cm and the long-term load stays below 50 N (222 lbs).

More in Ethernet & LAN Cables

Similar items