We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black VGA cable with male HD-15 connectors at both ends, one foot long, CMG-rated jacket

Cables To Go

Cables To Go 50210 VGA Cable 1 ft M/M CMG In-Wall

SKU CH-JATZ-MYT33 MPN 50210

A 1 ft VGA cable with CMG-rated jacket for in-wall installation, HD-15 male connectors on both ends, and full 15-pin wiring for DDC2 and EDID support up to 2048x1536 resolution

  • Connector count1
  • Connector detailsConnector on First End:1 x HD-15 Male VGA Connector on Secon
  • Cable length0.5 ft (0.15 m)
  • Product typeCable Connectors
  • Product colorBlack
  • Overall length1 ft (0.3 m)
  • CMG-rated jacket meets in-wall fire-safety codes
  • 2048 x 1536 resolution delivers sharp QXGA video
  • All 15 pins wired for DDC2 and EDID support
  • Low-profile connectors fit tight projector mounts
  • One-foot length keeps short runs tidy

In-wall VGA cable for monitors and projectors

The Cables To Go 50210 is a 1 ft male-to-male VGA cable built with a CMG-rated jacket for in-wall installation. It connects monitors, projectors or other video devices using standard HD-15 connectors. The short length suits tight runs inside conduit or behind mounted displays where a CMG rating is required.

Low-profile connectors simplify tight installs

Rounded, low-profile HD-15 ends fit into narrow spaces such as projector mount poles without straining the jack. All 15 pins are wired to carry DDC2 and EDID data so the source can read the display’s capabilities. The CMG jacket meets in-wall fire codes while remaining flexible for routing through studs.

No adapters or software included

The package contains only the cable itself; no drivers, configuration tools or extra adapters are supplied. Compatibility relies on the host and display supporting VGA signalling up to 2048x1536 resolution. Buyers needing longer runs, active signal boosting or digital interfaces such as HDMI or DisplayPort must source those separately.

How it compares

Measured against everything we stock in VGA Monitor Cables, at today’s prices. Recalculated every night.

Price $13.99
Pricier than about 60% of the 1,119 comparable items (median $10.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameC2G
Model name50210
Product typeCable Connectors
Product colorBlack
Ports & slots
Connector count1
Connector detailsConnector on First End:1 x HD-15 Male VGA
Connector on Second End:1 x HD-15 Male VGA
Size & build
Overall length1 ft (0.3 m)
Cable length0.5 ft (0.15 m)
Shipping weight0.07 kg
Package size140 × 140 × 13 mm

Questions about this item

How do I install the 1 ft VGA cable in a wall cavity, and what is the common mistake?

Run the CMG-rated jacket through studs or conduit and secure with low-voltage brackets; the mistake is stripping the jacket too far back, which removes the in-wall fire rating.

What maintenance or replacement will the 50210 cable need over time?

Inspect the HD-15 connectors for bent pins and the jacket for abrasion; replace the cable if any pin is damaged or the CMG jacket shows cuts.

At what resolution limit does the cable show its constraint first during sustained use?

The cable supports up to 2048x1536 resolution; beyond that the signal degrades first, so keep the source at or below QXGA.

More in VGA Monitor Cables

Similar items