Cameron Sino 3000mAh 10.80Wh Battery for D-TEK Select 712-202-G1
Replacement battery for D-TEK Select refrigerant leak detectors and PLS LED strobe equipment, rated 3000mAh and 10.80Wh
- Product weight315g
- 3000 mAh capacity powers the D-TEK Select leak detector longer
- 80 Wh energy rating matches the original equipment specification
- 6 V nominal voltage ensures correct operation with the 712-202-G1 unit
- ISO 9001 RoHS and CE certified for safety compliance
- 0 g weight and 128.54 x 24.10 x 22.30 mm dimensions fit the battery compartment exactly
Compatible Replacement Battery
This 3000mAh 10.80Wh lithium-ion pack replaces the original cell in D-TEK Select Refrigerant Leak Detector 712-202-G1 and PLS LED Strobe units. It matches the OEM part numbers 712-700-G1, A19267-460015-LSG and EAC-460015-003 and carries ISO 9001, RoHS and CE certification. The integrated protection circuit guards against overcharge, over-discharge, over-voltage and short circuits.
Installation Fit and Form Factor
The cell measures 128.54 by 24.10 by 22.30 millimetres and weighs 165.0 grams, sliding directly into the detector's battery compartment without adapters. A fully decoded chip communicates with the instrument exactly as the factory unit did, so no firmware updates or calibration steps are required. Shock-absorbing foam in the packaging protects the battery during transit.
Ideal Users and Limitations
Technicians who need a certified drop-in spare for field leak-detection work will find this pack reliable. Buyers whose devices use a different voltage or connector layout, or who require a higher capacity than 3000mAh, should verify compatibility before ordering. The battery is rated for storage temperatures up to 60 Celsius (140 Fahrenheit).
How it compares
Measured against everything we stock in Batteries, Cords & Power Parts, at today’s prices. Recalculated every night.
- Price $21.99
- Pricier than about 59% of the 100 comparable items (median $17.99).
Specifications
| Product | |
|---|---|
| Brand name | Cameron Sion |
| Size & build | |
| Product weight | 315g |
Questions about this item
How long will the 3000mAh capacity last before the voltage drops under continuous leak-detector use?
The pack delivers 3000mAh at 3.6V for 10.80Wh total energy; run-time depends on the detector's current draw, so divide 3000mAh by that draw to estimate hours.
Does the battery get hot or make noise during an all-day scan?
No moving parts or fan exist in the cell; it simply discharges, so it stays silent and only warms slightly under normal load.
What must I already own to install this 128.54 x 24.10 x 22.30mm pack?
You need a D-TEK Select 712-202-G1 detector with a matching 712-700-G1, A19267-460015-LSG or EAC-460015-003 battery compartment and connector.
More in Batteries, Cords & Power Parts
Similar items
aFe Power 80-AMP Battery Isolator 12V Solenoid Relay 4 Pin SPST
- 6.8834 L x8.2042 W…
- 6.8834 L x8.2042 W…
Cameron Sino Battery for Bosch MTS 5200 Vetronix Engine Analyser 2000mAh 14.40Wh
- 310g
12V 300A 4-Terminal Solenoid Relay
- Normally Open, Copp…
- 7.0104 L x7.1882 W…





