We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
18-inch Belden 1855A coaxial cable with DIN 1.0/2.3 male and BNC-F male connectors

Canare

Canare 3G SDI DIN 1.0/2.3 to BNC-F Adapter Cable Belden 1855A 18

SKU CH-DWSF-2CPDH

Connects 3G-SDI equipment using DIN 1.0/2.3 and BNC-F plugs on Belden 1855A cable, 18 inches long

  • 3G SDI signal integrity with Belden 1855A cable
  • DIN 1.0/2.3 to BNC-F connects broadcast gear
  • 18 inch length reduces rack clutter
  • Mini RG59 coax fits tight ENG bays
  • Precision connectors ensure reliable professional links

Professional 3G SDI adapter cable

The Canare 3G SDI DIN 1.0/2.3 to BNC-F adapter cable uses Belden 1855A coaxial construction for professional broadcast links. It carries 3G SDI signals across an 18 inch run between equipment with mismatched panel connectors. The male DIN 1.0/2.3 and male BNC-F ends provide a direct, soldered connection without intermediate couplers.

Compact link for dense racks and ENG trucks

Suited for installers fitting Red One cameras, Harris X50 routers or AJA, Nevion, Miranda, 3COM, Cisco and RED ONE gear into crowded bays or mobile trucks. The slim Belden 1855A RG59 profile saves space where multiple patch cables run side by side. Not for users needing longer runs, different connector genders or cable types outside the listed specifications.

Stable 3G SDI over sustained operation

The double-shielded Belden 1855A centre conductor maintains 50 ohm impedance and low attenuation during continuous 3G SDI transmission. Shielding rejects EMI in dense rack environments so the eye pattern stays clean over full production shifts. Connectors are crimped to broadcast-grade standards, resisting signal degradation from repeated mate cycles in daily use.

How it compares

Measured against everything we stock in Coaxial RF & Antenna Cables, at today’s prices. Recalculated every night.

Price $16.99
Cheaper than about 58% of the 201 comparable items (median $20.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

What equipment needs a DIN 1.0/2.3 input for this cable to connect?

This cable plugs into devices with a DIN 1.0/2.3 port such as Red One cameras, Harris X50 routers, or AJA, Nevion, Miranda, 3COM, Cisco broadcast gear.

Will the BNC-F end mate with legacy SDI gear using standard BNC connectors?

Yes, the male BNC-F connector fits traditional BNC sockets on older routers, monitors and switchers, so existing 50 or 59 ohm coax infrastructure works unchanged.

How can I confirm the 3G SDI signal passes cleanly after hooking it up?

Check for a stable 3G SDI lock on the receiving device with zero bit errors or video dropouts; the Belden 1855A shielding should keep the feed clean.

More in Coaxial RF & Antenna Cables

Similar items