We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two spools of fine copper braid .1 inch wide 19.6 ft total

CCOZN 2 Pack Solder Wick .1 Inch 19.6Ft No-Clean Copper Braided Desoldering Wick

SKU CH-4261-80NCE

Two copper braids, each 9.8 ft long and .1 inch wide, absorb excess solder with strong capillary action and leave only non-conductive, halide-free residue

  • Certifications and standardsCopper
  • Two-pack gives 19.6 ft total desoldering length
  • .1 inch width fits tight component pads
  • 100 % copper braid delivers fast heat conduction
  • No-clean flux leaves halide-free, non-conductive residue
  • Suitable for lab, home, school and industry use

Two Pack No Clean Copper Wick

This two pack supplies 19.6 ft of 0.1 inch wide braided copper desoldering wick. It is intended for technicians, hobbyists and students who need to remove solder from printed circuit boards without leaving corrosive residue. The no clean formulation suits bench work where post cleaning is impractical.

Sustained Heat Transfer And Capillary Action

The 100 percent copper braid conducts heat quickly along its length so the wick stays effective during repeated joint work. Fine flat stitch weaving maintains strong capillary pull across multiple desoldering operations without the braid saturating or losing flow. Halide free residue remains non conductive after extended use.

Width Limits Joint Size And Board Density

At 0.1 inch the braid fits standard through hole pads and wider surface mount leads but cannot reach fine pitch pins or dense BGA arrays. The 3.0 m length per roll sets a practical ceiling on total joints per pack before replacement. Users needing narrower braid or flux free operation must choose a different product.

How it compares

Measured against everything we stock in Soldering Irons & Stations, at today’s prices. Recalculated every night.

Price $10.99
Cheaper than about 85% of the 802 comparable items (median $25.99).

Specifications

Environment & compliance
Certifications and standardsCopper

Questions about this item

Does the .1 inch wide copper braid generate noticeable heat during long desoldering sessions?

The 100% copper braid conducts heat quickly so the wick itself warms up, but the fine 2.5 mm weave limits thermal mass and keeps the PCB from overheating.

What soldering iron tip size works with the 2.5 mm wide braid?

A standard chisel or conical tip around 2.5 mm matches the braid width and lets the flux activate evenly across the copper.

Will the halide-free, non-conductive residue interfere with older through-hole boards I rework?

The no-clean formulation leaves only trace halide-free residue that is non-corrosive and non-conductive, so it is safe for legacy through-hole assemblies.

More in Soldering Irons & Stations

Similar items