We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver rackmount network switch with 48 RJ-45 ports and four SFP28 uplinks

Cisco Systems, Inc.

Cisco Systems, Inc. C1300X-48T-4X 48-port 10G network switch

SKU CH-JNJE-S8F7R MPN C1300X-48T-4X

A managed Layer 3 rackmount switch with 48 Gigabit Ethernet ports, four 10G SFP28 uplinks and stacking for up to eight units

  • Product formatRackmount
  • Supported standardsIEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Et
  • Management typeManaged
  • Main port typeTotal system ports: 48 x Gigabit Ethernet + 4 × 10G RJ-45 po
  • Management accessWeb user interface: Built-in switch configuration utility fo
  • MAC table sizeup to 32,000 rules

Ports 48x 10/100/1000 RJ45 · 4x 10G SFP28

PoE · Non-PoE PoE

Power Budget 740W

  • 48 Gigabit ports plus four 10G uplinks give high-density connectivity
  • Managed Layer 3 switching enables wire-speed IPv4 and IPv6 routing
  • Stack up to eight units for 400 ports managed as one system
  • Advanced QoS with eight hardware queues prioritises critical traffic
  • Browser-based utility simplifies configuration and ongoing network maintenance

48-port Gigabit with 10G uplinks

The Cisco C1300X-48T-4X is a rackmount managed Layer 3 switch built for small and medium businesses and branch offices. It provides 48 Gigabit Ethernet RJ-45 ports plus four SFP28 uplinks running at 10 Gbps. The switch supports stacking up to eight units for a single 400-port logical system.

130.95 mpps throughput and 3 MB buffer

Wire-speed forwarding reaches 130.95 million packets per second with 64-byte frames. The 3 MB packet buffer absorbs burst traffic while jumbo frames up to 9000 bytes reduce overhead for large transfers. A 32,000-entry MAC table and 7168 IPv4 routes provide headroom for growing networks.

No Power over Ethernet support

This model does not supply PoE or PoE+ on any port. Devices such as wireless access points, IP phones or cameras will need separate injectors or a PoE-capable switch. Power draw is 66.7 W at 110 V and 72.1 W at 220 V.

How it compares

Measured against everything we stock in Ethernet & PoE Switches, at today’s prices. Recalculated every night.

Price $1,124.99
Pricier than about 67% of the 2,759 comparable items (median $482.99).

Specifications

Product
Brand nameCisco Systems, Inc.
Product line1300X Series
Model nameC1300X-48T-4X
Part numberC1300X-48T-4X
Memory
Buffer sizePacket buffer: 3 MB
Capacity in Millions of Packets Per Second (mpps) (64-byte packets): 130.95
Connectivity
Supported standardsIEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab
1000BASE-T Gigabit Ethernet, IEEE 802.3ad Link Aggregation Control Protocol, IEEE 802.3z Gigabit Ethernet, IEEE 802.3ae 10 Gbit/s Ethernet over fiber for LAN, IEEE 802.3an 10GBASE-T 10 Gbit/s Ethernet over copper twisted pair cable, IEEE 802.3x Flow Control, IEEE 802.1D (STP, GARP, and GVRP), IEEE 802.1Q/p VLAN, IEEE 802.1w Rapid STP, IEEE
802.1s Multiple STP, IEEE 802.1X Port Access Authentication, IEEE 802.3af, IEEE 802.3at, IEEE 802.1AB Link Layer Discovery Protocol, IEEE 802.3az Energy Efficient Ethernet
Management typeManaged
MAC table sizeup to 32,000 rules
Jumbo frame supportFrame sizes up to 9000 bytes. The default MTU is 2000 bytes
Layer support3
Power
Power over EthernetNo
Power detailsSystem power consumption
110 V=66.7 W
220 V=72.1 W
Size & build
Product dimensions444.3 × 270 × 43.94 mm (17.49 × 10.63 × 1.73 in )
Product weight3.6kg (7.94 lb)
Shipping weight6.21 kg
Package size538 × 401 × 119 mm
Environment & compliance
ComplianceUL (UL 62368), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47) Class A
More details
Product formatRackmount

Other versions of this model

3 more in the same range

Questions about this item

Will the 48 Gigabit Ethernet ports auto-negotiate with my older 100 Mbps devices?

Yes, the switch supports IEEE 802.3u 100BASE-TX Fast Ethernet, so each of the 48 RJ-45 ports will automatically negotiate 10/100/1000 Mbps speeds with legacy gear.

How can I verify the 4 SFP28 uplinks are passing 10 Gbps traffic after installation?

Log into the web UI, open the interface statistics for the four SFP28 ports and confirm the link speed shows 10 Gbps and the counters increment without CRC errors.

Does the box include SFP28 transceivers for the four 10G uplinks or must I purchase them separately?

The switch ships with the 48 RJ-45 ports ready to use; the four SFP28 uplink slots are empty and require compatible transceivers or direct-attach cables bought separately.

More in Ethernet & PoE Switches

Similar items