We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White 35 ft Cat6 shielded plenum Ethernet cable with snagless RJ45 connectors

Comprehensive Cable and Connectivity

Comprehensive Cable and Connectivity Cat6 Snagless Solid Plenum Shielded White Patch Cable 35ft

SKU CH-EHQ2-XYETM

Shielded Cat6 plenum patch cable with solid 23 AWG conductors, snagless boots and 550 MHz bandwidth for gigabit networks

  • Cable categoryCategory 6
  • First connector1 x RJ-45 Male Network
  • Second connector1 x RJ-45 Male Network
  • Product typeCategory 6
  • Overall length35 ft (10.7 m)
  • Product colorWhite
  • 550 MHz bandwidth supports gigabit Ethernet speeds
  • Snagless boot prevents latch damage during installation
  • Plenum-rated jacket meets fire-safety requirements for air spaces
  • Solid 23 AWG copper ensures reliable signal over 35 ft
  • Overall foil shield reduces interference in noisy environments

Cat6 Shielded Plenum Cable 35ft

This Category 6 shielded plenum cable runs 35 feet with RJ-45 connectors on both ends. It uses solid 23 AWG bare copper conductors, an overall shield and a low-smoke PVC jacket rated for plenum spaces. The white snagless boot protects the latch during pulls through conduit or ceiling tiles. It is built for installers and IT teams who need fire-rated horizontal runs in commercial buildings.

550 MHz bandwidth headroom

The cable is specified to 550 MHz and supports Gigabit Ethernet, Fast Ethernet, 155 Mbps ATM and 622 Mbps wideband applications. Shielding and the pair separator keep crosstalk low in noisy electrical environments. The solid-conductor design is intended for fixed horizontal runs; it is not suited for repeated flexing or short patch cords that require stranded wire.

Replaces unshielded or riser-rated Cat6

This cable upgrades installations that previously used unshielded or riser-rated Category 6 where plenum fire rating and EMI immunity are now required. The jump is worth it when building codes mandate plenum jacket or when cable trays run beside fluorescent ballasts, motor feeds or other interference sources.

How it compares

Measured against everything we stock in Ethernet & LAN Cables, at today’s prices. Recalculated every night.

Price $81.99
Pricier than about 90% of the 9,945 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameComprehensive
Product typeCategory 6
Product colorWhite
Connectivity
Cable categoryCategory 6
Ports & slots
First connector1 x RJ-45 Male Network
Second connector1 x RJ-45 Male Network
Size & build
Overall length35 ft (10.7 m)

Questions about this item

Will the 550 MHz shielded Cat6 cable run reliably alongside older 100BASE-TX equipment I still use?

Yes, the cable supports all Category 6 applications including Ethernet 100BASE-TX, so it works with your existing 100 Mbps gear while providing headroom for gigabit speeds.

How can I verify the 35 ft plenum run is performing at 550 MHz after installation?

Use a qualified cable certifier to test the link for Category 6 550 MHz parameters such as insertion loss, NEXT, and return loss; a passing report confirms the solid 23 AWG shielded construction is performing as specified.

Does the white snagless patch cable include both RJ-45 connectors, or do I need to buy plugs separately?

The cable arrives with a molded RJ-45 male connector on each end, so no additional plugs or termination tools are required.

More in Ethernet & LAN Cables

Similar items