We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Single green 240-pin DDR3 DIMM module without heat spreader

Computer Memory Solutions

Computer Memory Solutions 8GB DDR3 1333MHz CL9 DIMM memory upgrade

SKU CH-YCXE-N61QB

8 GB DDR3 1333 MHz CL9 DIMM module validated for Gigabyte GA-78LMT-S2, GA-78LMT-S2P and GA-A75-D3H boards

  • Total capacity8 GB
  • Rated speedDDR3 1333 (PC3 10600)
  • ChipsetMajor Brand Chipset
  • CAS latencyCL9
  • Memory timings9-9-9
  • Rated voltage1.5 V
  • 8GB capacity expands multitasking headroom for daily workloads
  • 1333 MHz DDR3 speed matches board specifications for stable operation
  • CL9 9-9-9 timings deliver responsive memory access
  • 5 V standard voltage ensures broad motherboard compatibility
  • Validated for Gigabyte GA-78LMT-S2, GA-78LMT-S2P and GA-A75-D3H systems

8GB DDR3 DIMM for Gigabyte boards

This Computer Memory Solutions module delivers 8GB of DDR3-1333 non-ECC memory on a 240-pin unbuffered DIMM. It runs at CL9 9-9-9 timings and 1.5V. The kit contains a single stick built with major-brand chips and no heat spreader. It is designed for system-specific upgrades on supported Gigabyte motherboards.

Suits owners of listed Gigabyte models

The memory is guaranteed compatible with the GA-78LMT-S2, GA-78LMT-S2P and GA-A75-D3H boards. The first two support up to 16GB across two sockets, while the GA-A75-D3H supports up to 32GB across four sockets. Builders using other chipsets or requiring ECC or registered modules should look at different memory.

DDR3-1333 CL9 1.5V specification

The decisive spec is the DDR3-1333 (PC3-10600) speed with CL9 latency at 1.5V. Only systems that accept unbuffered non-ECC DDR3 DIMMs at this voltage and timing will operate correctly with this module.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $16.99
Cheaper than about 93% of the 21,161 comparable items (median $397.99).
Total capacity 8 GB
Lower than about 80% of the 20,941 comparable items (median 32 GB).
Price per GB $2.12 per GB
Cheaper than about 93% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameComputer Memory Solutions
Model nameCM10246410600DIMM
Total capacity8 GB
Product type240-Pin DDR3 SDRAM
Performance
Rated speedDDR3 1333 (PC3 10600)
Processor
ChipsetMajor Brand Chipset
Memory
CAS latencyCL9
Memory timings9-9-9
ECC supportNo
Buffer typeUnbuffered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.5 V
Compatibility
Compatible systemsGigabyte GA-78LMT-S2, GA-78LMT-S2P, GA-A75-D3H
In the box
Included items1 Memory RAM Stick

Questions about this item

How do I install the 240-pin DDR3 DIMM on the GA-78LMT-S2 and what step is often missed?

Power off, open the case, align the notch on the module with the slot key, press firmly until both side clips click shut, then power on and verify 8 GB appears in BIOS; the step often missed is pressing hard enough to engage both clips.

What maintenance or replacement will this 8 GB DDR3-1333 module need later?

No scheduled maintenance is required; keep interior dust-free and ensure the 1.5 V unbuffered DIMM stays seated. Replace only if memory errors appear or total capacity must exceed the board's 16 GB or 32 GB limits.

What limit appears first under sustained use with this CL9 1.5 V DDR3 stick?

The platform's maximum supported memory — 16 GB on the GA-78LMT-S2 or GA-78LMT-S2P and 32 GB on the GA-A75-D3H — is reached before any thermal or voltage limit of the module itself.

More in Model-Specific Memory Upgrades

Similar items