Crucial CT2K8G3S160BM 16GB (2 x 8GB) DDR3 1600 SO-DIMM memory upgrade
- 16 GB (2 × 8 GB)
- DDR3 1600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
An 8 GB DDR4 SODIMM module running at 2133 MHz with CL15 timing, built for the Dell OptiPlex 7050 Micro
This 8GB DDR4 2133MHz SODIMM module is built specifically for the Dell OptiPlex 7050 Micro. It runs at PC4-17000 speed with CL15 timings and 1.2V operation. The unbuffered, non-ECC stick uses a 260-pin layout and 2Rx8 rank configuration. It installs directly into the system's memory slots without additional configuration.
This module suits owners of the OptiPlex 7050 Micro who want to add or replace a single 8GB stick. The system supports a maximum of 32GB across two sockets, so this kit works within that limit. Buyers who need ECC error correction or registered memory for server workloads should look elsewhere. The lack of a heat spreader also makes it unsuitable for extreme overclocking scenarios.
Check how many of the two SODIMM slots are already populated in your OptiPlex 7050 Micro. Confirm the existing memory runs at DDR4 2133MHz to match this module's speed. Ensure the BIOS is updated to the latest version for full compatibility. The system accepts unbuffered, non-ECC DDR4 SODIMMs only.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Computer Memory Solutions |
| Model name | CM10246417000SO |
| Total capacity | 8 GB |
| Product type | 260-Pin DDR4 SO-DIMM |
| Performance | |
| Rated speed | DDR4 2133 (PC4 17000) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL15 |
| Memory timings | 15-15-15 |
| ECC support | No |
| Buffer type | Unbuffered |
| Memory rank | 2Rx8 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.2 V |
| Compatibility | |
| Compatible systems | Dell OptiPlex 7050 Micro |
| In the box | |
| Included items | 1 Memory RAM Stick |
Yes, the OptiPlex 7050 Micro has two SODIMM slots supporting up to 32GB total, so at least one must be free to install this 260-pin DDR4 2133MHz stick.
The module uses standard JEDEC DDR4 2133MHz timings of 15-15-15 at 1.2V unbuffered non-ECC, so it will downclock to match any slower stick and run in dual-channel if capacities match.
Enter the BIOS or use a tool like CPU-Z; the memory tab should show 2133MHz frequency, 15-15-15 timings and 8GB capacity for the new SODIMM.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?