XPG AGAMMIXS70B-4T-CS 4TB M.2 2280 NVMe internal SSD
- M.2 2280
- Internal SSD
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 1 TB internal SSD in M.2 2280 form factor with SATA interface and up to 2000 MB/s sequential read and write speeds
This 1TB internal solid state drive uses the M.2 2280 form factor and a SATA 6.0Gb/s interface. It is built with MLC memory components and a 26-pin connector for consumer workloads. The single-sided design helps it fit thin-and-light systems.
Sustained sequential read and write reach up to 550 MB/s on the SATA Rev. 3.0 link with backward compatibility to SATA Rev. 2.0. Random 4k performance scales with capacity, reaching up to 80,000 read and 80,000 write IOPS on the 480GB reference point. Endurance is rated up to 800TB written and 0.93 DWPD at the same capacity.
Verify that your motherboard or laptop provides an M.2 slot wired for SATA signalling, not PCIe only, and that the key matches the drive's connector. Confirm the operating temperature range of 0°C to 70°C suits your chassis airflow. The drive measures 80mm by 22mm by 3.5mm and weighs approximately 5.99g at the 256GB reference capacity.
Measured against everything we stock in Internal NVMe & SATA SSDs, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Computer Memory Solutions |
| Model name | CM1TBM2SATA6GBMLCX1 |
| Part number | CM1TBM2SATA6GBMLC |
| Total capacity | 1 TB |
| Product type | Internal Solid State Drive (SSD) |
| Intended use | Consumer |
| Performance | |
| Sustained sequential read rate | Up to 2,000 MB/s |
| Sustained sequential write rate | Up to 2,000 MB/s |
| Storage | |
| NAND flash type | MLC |
| Ports & slots | |
| Interface type | PCI-Express 3.0 x4 |
| Connection | 26 Pin |
| Size & build | |
| Form factor | M.2 2280 |
| Heat sink | Without HeatSink |
| Overall height | 0.0625 in (0.16 cm) |
| Overall width | 0.875 in (2.22 cm) |
| Product depth | 3.125 in (7.94 cm) |
| Environment & compliance | |
| Operating temperature range | 0 °C to 70 °C |
| Storage temperature range | -40 °C to 85 °C |
Yes, the single-sided design integrates easily into thin-and-light systems with M.2 connectors.
Up to 550MB/s read and up to 520MB/s write for the 480GB capacity point; the 1TB model delivers up to 2000MB/s read and 2000MB/s write.
The drive ships without a heatsink and operates within 0°C to 70°C; add a motherboard heatsink if your chassis airflow is limited.
More in Internal NVMe & SATA SSDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?