We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black DDR5 active cooler with dual 5020 fans and ARGB lighting

Corn Electronics

Corn Electronics DDR5 Active Cooling Dual 5020 Fans Black

SKU CH-Z7NV-2CF6Q

Dual 50 mm fans with hydraulic bearings push up to 9.11 CFM each at 4 200 RPM while staying as quiet as 9.6 dB(A)

  • Fan size50 mm
  • Bearing designHydraulic Bearings
  • Rotational speed800 to 4,200 RPM±10%
  • Airflow rate1.3 to 9.11CFM
  • Operating noise9.6 to 25.3 dB(A)
  • Product dimensions50 × 50 × 20 mm

Color Black

  • Active cooling for DDR5 memory with dual 5020 fans
  • Addressable RGB lighting compatible with all ARGB sync ecosystems
  • Hydraulic bearings deliver quiet operation from 9.6 to 25.3 dB(A)
  • PWM control adjusts fan speed between 800 and 4200 RPM±10%
  • Dual fans push 9.11 CFM each to remove heat from motherboard and power supply

DDR5 Active Cooling Dual 5020 Fans

This Corn Electronics cooler fits ATX motherboards and targets DDR5 memory modules. Dual 50 mm fans with hydraulic bearings push 1.3 to 9.11 CFM each at speeds between 800 and 4200 RPM. Addressable RGB lighting syncs with compatible motherboard software for colour coordination.

Builders adding active memory cooling to an ATX

The unit mounts over DDR5 slots using a 4-pin PWM header for speed control. Systems without a spare PWM header or with tall memory heatsinks that block installation will need a different approach. Cases with limited clearance above the DIMM area should verify fit before purchase.

ARGB sync and hydraulic bearings

Addressable RGB lets the lighting match other components through standard motherboard control. Hydraulic bearings aim to keep noise between 9.6 and 25.3 dB(A) across the speed range. The 12 V, 1.2 W draw adds minimal load to the fan header.

How it compares

Measured against everything we stock in Drive & M.2 SSD Heatsinks, at today’s prices. Recalculated every night.

Price $20.99
Pricier than about 70% of the 27 comparable items (median $16.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Performance
Rotational speed800 to 4,200 RPM±10%
Airflow rate1.3 to 9.11CFM
Size & build
Fan size50 mm
Bearing designHydraulic Bearings
Product dimensions50 × 50 × 20 mm
Environment & compliance
Operating noise9.6 to 25.3 dB(A)

Other versions of this model

5 more in the same range

Questions about this item

What motherboard form factor does this DDR5 cooler fit?

It is designed for ATX motherboards and mounts directly over the memory slots.

Can the 4-pin PWM fans be controlled by an older 3-pin header?

Yes, the 4-pin PWM connector will run on a 3-pin header at full speed, though speed control is lost.

How do I confirm the ARGB lighting is synchronised after installation?

Connect the ARGB cable to a 5V 3-pin header and use your motherboard software to match the lighting effects.

More in Drive & M.2 SSD Heatsinks

Similar items