XPG AGAMMIXS70B-4T-CS 4TB M.2 2280 NVMe internal SSD
- M.2 2280
- Internal SSD
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
960 GB M.2 2280 NVMe SSD delivers up to 3480 MB/s sequential read and 3000 MB/s sequential write with 720 TBW endurance
The Corsair Force MP510 is a 960GB internal SSD built on the M.2 2280 form factor. It connects through a PCI-Express 3.0 x4 interface using NVMe 1.3 protocol. The drive targets consumers who want a direct motherboard or notebook installation without extra cables.
Moving to this drive replaces mechanical storage or older solid-state units that top out at lower throughput. The jump is worth it when workloads demand sustained sequential speeds up to 3480 MBps read and 3000 MBps write, plus random performance of 280000 IOPS read and 700000 IOPS write.
The 960GB capacity handles operating systems, applications and active project files with comfortable headroom. The 720 TBW rating supports heavy daily writes for years, while the PS5012-E12 controller and 3D TLC NAND maintain consistent performance until the endurance limit is reached.
Measured against everything we stock in Internal NVMe & SATA SSDs, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Corsair |
| Product line | Force MP510 |
| Model name | CSSD-F960GBMP510B |
| Total capacity | 960 GB |
| Product type | Internal Solid State Drive (SSD) |
| Intended use | Consumer |
| Performance | |
| Sequential read speed | Up to 3,480 MB/s |
| Sequential write speed | Up to 3,000 MB/s |
| Random read (4K) | Up to 280,000 IOPS |
| Random write (4K) | Up to 700,000 IOPS |
| Storage | |
| NAND flash type | 3D TLC |
| Controller chip | PS5012-E12 |
| Data encryption | AES 256-bit encryption |
| Ports & slots | |
| Interface type | PCI-Express 3.0 x4, NVMe 1.3 |
| Power | |
| Idle power draw | 30 mW |
| Active power draw | Average Active Read: 6.9 W Average Active Write: 5.6 W |
| Size & build | |
| Form factor | M.2 2280 |
| Overall height | 3.5 mm |
| Overall width | 22 mm |
| Product depth | 80 mm |
| Product weight | 8.2g |
| Shipping weight | 0.03 kg |
| Package size | 132 × 71 × 13 mm |
| Environment & compliance | |
| Operating temperature range | 0 °C to 65 °C |
| Storage temperature range | -40 °C to 85 °C |
| Operating humidity range | 90% RH (40 celsius degree) |
| Max shock tolerance | 1500G |
| Vibration tolerance | 20 to 80 Hz / 1.52 mm |
| More details | |
| Mean time between failures | 1,800,000 h |
The drive uses the M.2 2280 form factor and a PCIe 3.0 x4 NVMe 1.3 interface, so it fits any motherboard or notebook slot wired for PCIe NVMe M.2 2280.
Insert the drive at an angle into the M.2 slot, secure it with the motherboard screw, then enable the NVMe controller in BIOS and install the OS or Corsair SSD Toolbox for firmware updates.
The 3D TLC NAND is rated for 720 TBW and a 1,800,000-hour MTBF; monitor health in Corsair SSD Toolbox and plan replacement once the drive approaches its written endurance limit.
More in Internal NVMe & SATA SSDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?