We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bare M.2 2280 circuit board, black components, no heatsink, gold edge connector

Corsair

Corsair MP700 PRO 4TB M.2 2280 PCIe 5.0 x4 internal SSD

SKU CH-2GVW-KDS8F

A 4 TB M.2 2280 PCIe 5.0 x4 internal SSD with 3D TLC NAND, AES 256-bit encryption and up to 12,400 MB/s sequential read and 11,800 MB/s sequential write

  • Total capacity4 TB
  • Sequential read speedUp to 12,400 MB/s
  • Sequential write speedUp to 11,800 MB/s
  • Interface typePCI-Express 5.0 x4
  • Form factorM.2 2280
  • Product typeInternal Solid State Drive (SSD)
  • Sequential reads up to 12,400 MB/s accelerate large file transfers
  • Sequential writes up to 11,800 MB/s speed up content creation workflows
  • Random reads up to 1.7M IOPS deliver responsive application loading
  • Random writes up to 1.6M IOPS sustain heavy multitasking performance
  • 3,000 TBW endurance rating supports intensive long-term workloads

Capacity and interface

This Corsair MP700 PRO is a 4TB internal SSD built in the M.2 2280 form factor. It connects through a PCI-Express 5.0 x4 link and uses 3D TLC NAND with a Phison PS5026-E26 controller. The drive targets enthusiasts and workstation users who need maximum throughput for large datasets and demanding applications.

Sequential speed ceiling

The single figure that determines fit is the rated sequential read of up to 12400 MBps and sequential write of up to 11800 MBps. Those peaks require a motherboard with a native PCIe 5.0 M.2 slot and adequate cooling; on older platforms the drive will negotiate a lower link speed and deliver reduced performance.

Thermals and power

Without a bundled heatsink the drive relies on the motherboard or a third‑party cooler to stay within its 0°C to 70°C operating range. Active read and write power averages 11W each, so sustained workloads can raise temperatures quickly. A capable M.2 heatsink or direct‑contact cooler is essential to avoid throttling and maintain consistent speeds.

How it compares

Measured against everything we stock in Internal NVMe & SATA SSDs, at today’s prices. Recalculated every night.

Price $467.99
Pricier than about 79% of the 1,994 comparable items (median $180.49).
Total capacity 4 TB
Higher than about 90% of the 1,368 comparable items (median 1 TB).
Sequential read speed Up to 12,400 MB/s
Higher than about 93% of the 1,180 comparable items (median 2,400 MB/s).
Price per TB $117.00 per TB
Cheaper than about 75% of the 1,362 comparable items (median $165.50 per TB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameCorsair
Product lineMP700 PRO
Model nameCSSD-F4000GBMP700PNH/RF2
Part numberCSSD-F4000GBMP700PNH
Total capacity4 TB
Product typeInternal Solid State Drive (SSD)
Intended useConsumer
Performance
Sequential read speedUp to 12,400 MB/s
Sequential write speedUp to 11,800 MB/s
Random read (4K)1.7M
Random write (4K)1.6M
Storage
NAND flash type3D TLC
Controller chipPhison PS5026-E26
Data encryptionAES 256-bit encryption
Write endurance3000 TB
Ports & slots
Interface typePCI-Express 5.0 x4
Power
Active power drawPower Average Active Read: 11 W
Power Average Active Write: 11 W
Size & build
Form factorM.2 2280
Heat sinkWithout HeatSink
Environment & compliance
Operating temperature range0 °C to 70 °C
Storage temperature range-40 °C to 85 °C
Operating humidity range40 °C 90% RH
Max shock tolerance40 °C 93% RH

Questions about this item

Does this drive include a heatsink or do I need to buy one separately?

The package contains the MP700 PRO M.2 SSD only; no heatsink is included so a separate cooler is required.

Will it fit in a standard M.2 2280 slot on my motherboard?

Yes, the drive uses the M.2 2280 form factor and a PCI-Express 5.0 x4 interface, matching standard M.2 2280 slots.

What sustained power draw should I plan for in my thermal design?

Average active read and write power are each 11W, so the cooling solution must handle that load.

More in Internal NVMe & SATA SSDs

Similar items