We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 6-pin male to three 4-pin Molex female splitter cable, 20-inch main lead with two 6-inch branches

Corsair PSU 6-pin to 3x Molex 4-pin power cable 20in

SKU CH-HGEJ-0YTPQ

Connects a Corsair modular PSU to three Molex devices with a 20-inch 18AWG cable

  • Refresh frequency20 in (50.8 cm)
  • Cable length32.8 ft (10 m)
  • Team affiliation1 Piece
  • First connector1x Molex LP4 female
  • Second connector1x Molex LP4 female
  • Connector genderMale to Female
  • Connects Corsair modular PSUs to Molex devices
  • 18AWG copper wire for reliable power delivery
  • 20 inch main cable plus 6 inch branches
  • Supports up to two riser cards safely
  • Includes self-adhesive tape for cable management

Corsair PSU 6-pin to 3x Molex power cable

This 20-inch adapter connects compatible Corsair modular power supplies to devices using 4-pin Molex connectors. It splits a single 6-pin male PSU port into three Molex female outputs for drives or riser cards. The cable uses 18AWG copper wire and includes self-adhesive tape for securing the wiring. It is designed only for the Corsair series listed in the specifications.

Sustained load limits for mining riser cards

The manufacturer states this cable supports a maximum of two riser cards under continuous operation. Connecting three riser cards will cause the cable to overheat, leading to damage or burnout at any time. The 18AWG gauge wire and split design are rated for this dual-device limit only. Exceeding it voids safe operation and risks damaging connected hardware.

Compatibility checklist before ordering

Verify your power supply is a supported Corsair RM, RMX, RMi, HX, HXi, AX, AXi, SF, TX, CS, or CX series model with a standard 6-pin modular port. This cable does not work with AX1200, AX750, AX850, SF 3.1 series, SFL types, or the mini 3.1 interface on SF/SFL units. It is not compatible with any non-Corsair brand power supplies.

How it compares

Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.

Price $22.99
Pricier than about 64% of the 7,839 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameApple
Model name8541687215
Product typeExtension Cable
Product colorBlack
Display
Refresh frequency20 in (50.8 cm)
Ports & slots
First connector1x Molex LP4 female
Second connector1x Molex LP4 female
Connector genderMale to Female
Size & build
Overall length< 1 in
Cable length32.8 ft (10 m)
More details
Team affiliation1 Piece

Questions about this item

Does this 20-inch cable run hot when powering riser cards all day?

The 18AWG copper conductors are rated for continuous use, but the maker warns against connecting more than two riser cards to avoid overheating or damage.

Which Corsair PSU series must I already own for the 6-pin male connector to fit?

Compatible series include RM, RMX, RMi, HX, HXi, CX, CX-M, CS, SF, TX, AX, AXi, and AX1500i, except AX1200, AX750, AX850 and any SF/SFL units with the mini 3.1 interface.

Can I keep using my older Molex hard drives with this splitter?

Yes, the three 4-pin Molex female connectors supply standard power to legacy hard drives or riser cards that use Molex inputs.

More in Internal PSU & Riser Cables

Similar items