Crucial CT064M4SSD2 M4 64GB 2.5" SATA III internal SSD
- 2.5 in (6.35 cm)
- Internal SSD
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
2.5-inch SATA internal SSD with 256GB capacity, MLC memory and sequential reads up to 500MBps
Capacity 256GB
This 2.5" SATA internal SSD uses MLC NAND and a Marvell controller to deliver 256GB of storage for notebooks, desktops and workstations. It targets everyday client computing where low power draw and resistance to shock matter. Sequential reads reach 500MBps on a 6Gbps link and 265MBps on a 3Gbps link.
The drive drops into any standard 2.5" bay and connects with a regular SATA data and power cable. No extra drivers are required because the operating system sees a normal AHCI device. The only common issue is leaving the host controller in IDE mode, which caps throughput at the slower 3Gbps rate.
Sustained sequential write holds at 260MBps while random 4KB performance reaches 45,000 read IOPS and 50,000 write IOPS. Average access time stays below 0.1ms and the controller includes built-in EDC/ECC plus SMART monitoring. Power draw remains at 0.16W active and under 85mW idle across the 0°C to 70°C operating range.
Measured against everything we stock in Internal NVMe & SATA SSDs, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Crucial |
| Product line | M4 |
| Model name | CT256M4SSD2 |
| Total capacity | 256 GB |
| Product type | Internal Solid State Drive (SSD) |
| Intended use | Consumer |
| Performance | |
| Sustained sequential read rate | Up to 500 MB/s (SATA 6Gbs); 265 MB/s (SATA 3Gbs) |
| Sustained sequential write rate | Up to 260 MB/s (SATA 6 Gbit/s) |
| Random read (4K) | Up to 45,000 IOPS |
| Random write (4K) | Up to 50,000 IOPS |
| Storage | |
| NAND flash type | MLC |
| Controller chip | Marvell |
| Ports & slots | |
| Interface type | SATA III |
| Power | |
| Idle power draw | < 85 mW |
| Active power draw | 0.16 W |
| Size & build | |
| Form factor | 2.5 in (6.35 cm) |
| Overall height | 9.5 mm |
| Overall width | 69.85 mm |
| Product depth | 100.5 mm |
| Product weight | 75g |
| Shipping weight | 0.11 kg |
| Package size | 130 × 130 × 42 mm |
| Environment & compliance | |
| Operating temperature range | 0 °C to 70 °C |
| Storage temperature range | -40 °C to 85 °C |
| Max shock tolerance | 1500G |
| More details | |
| Mean time between failures | 1,200,000 h |
Other versions of this model
Run a SATA 6Gbps benchmark tool such as CrystalDiskMark; a healthy drive on a 6Gbps port should show sustained reads near 500 MB/s and writes near 260 MB/s.
The drive ships as a bare 2.5" SATA SSD; you must provide a SATA data cable, a SATA power connection and, if your bay is 3.5", a mounting bracket.
The CT256M4SSD2 is the 256 GB variant of the M4 series and already uses MLC flash with the Marvell controller; select this part number for that configuration.
More in Internal NVMe & SATA SSDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?