XPG AGAMMIXS70B-4T-CS 4TB M.2 2280 NVMe internal SSD
- M.2 2280
- Internal SSD
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 2.5-inch 256GB SATA internal SSD with up to 500MBps sequential read, 260MBps write, 45,000 random read IOPS and 50,000 random write IOPS
The Crucial M4 CT256M4SSD1 is a 2.5 inch internal solid-state drive with 256 GB capacity and a 7 mm height. It uses MLC NAND and a Marvell controller on a SATA III interface. The drive targets consumer notebooks and desktops needing a slim profile without sacrificing storage space.
On a SATA 6 Gbps link the drive delivers up to 500 MBps sustained sequential read and up to 260 MBps sustained sequential write. On a SATA 3 Gbps link sustained sequential read reaches 265 MBps. Random performance reaches up to 45000 IOPS read and 50000 IOPS write at 4 KB.
The SATA III interface caps theoretical throughput at 6 Gbps, so real-world sustained speeds cannot exceed the bus limit. The drive operates from 0 °C to 70 °C and draws less than 85 mW idle and 0.16 W active. MTBF is rated at 1200000 hours with built-in EDC and ECC for data reliability.
Measured against everything we stock in Internal NVMe & SATA SSDs, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Crucial |
| Product line | M4 |
| Model name | CT256M4SSD1 |
| Total capacity | 256 GB |
| Product type | 7 mm Internal Solid State Drive (SSD) |
| Intended use | Consumer |
| Performance | |
| Sustained sequential read rate | Up to 500 MB/s (SATA 6Gbs); 265 MB/s (SATA 3Gbs) |
| Sustained sequential write rate | Up to 260 MB/s (SATA 6 Gbit/s) |
| Random read (4K) | Up to 45,000 IOPS |
| Random write (4K) | Up to 50,000 IOPS |
| Storage | |
| NAND flash type | MLC |
| Controller chip | Marvell |
| Ports & slots | |
| Interface type | SATA III |
| Power | |
| Idle power draw | < 85 mW |
| Active power draw | 0.16 W |
| Size & build | |
| Form factor | 2.5 in (6.35 cm) |
| Overall height | 7 mm |
| Overall width | 69.85 mm |
| Product depth | 100.5 mm |
| Product weight | 73g |
| Shipping weight | 0.14 kg |
| Package size | 130 × 130 × 18 mm |
| Environment & compliance | |
| Operating temperature range | 0 °C to 70 °C |
| Storage temperature range | -40 °C to 85 °C |
| Max shock tolerance | 1500G |
| More details | |
| Mean time between failures | 1,200,000 h |
Active power is 0.16W; idle power is below 85 mW, so heat and noise stay minimal during continuous use.
A free 2.5 inch drive bay or caddy and a SATA data plus power connector; the drive is 7mm high and fits standard SATA III ports.
Yes — it runs at SATA 3Gbps with sequential reads up to 265MBps and writes up to 260MBps, and supports the SMART command set for monitoring.
More in Internal NVMe & SATA SSDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?