We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver rectangular 2.5 inch SATA SSD with label

Crucial

Crucial MX500 CT2000MX500SSD1 2TB 2.5" SATA internal SSD

SKU CH-ZEQ0-5JCK4

2.5-inch SATA SSD with 2TB 3D NAND, up to 560 MB/s read and 510 MB/s write, AES 256-bit encryption, 360 TBW and 1.8 million hours MTTF

  • Total capacity2 TB
  • Sequential read speedUp to 560 MB/s
  • Sequential write speedUp to 510 MB/s
  • Interface typeSATA III
  • Form factor2.5 in (6.35 cm)
  • Product typeInternal Solid State Drive (SSD)
  • Up to 560 MB/s sequential read speed for fast boot times
  • Up to 510 MB/s sequential write speed for quick file saves
  • AES 256-bit hardware encryption protects data from unauthorised access
  • Integrated Power Loss Immunity preserves work during unexpected power cuts
  • 360 TBW endurance rating with 1.8 million hours MTTF for long-term reliability

2TB SATA SSD for everyday systems

The Crucial MX500 CT2000MX500SSD1 is a 2TB 2.5-inch internal solid state drive with a SATA III interface. It uses Micron 3D NAND and delivers sequential reads up to 560 MBps and writes up to 510 MBps. Random performance reaches 95,000 read IOPS and 90,000 write IOPS. AES 256-bit hardware encryption and Integrated Power Loss Immunity protect stored data.

Suits SATA capacity upgrades; not for PCIe-only bays

This drive suits users adding high-capacity flash storage to a SATA-connected laptop or desktop. It is not compatible with slots that accept only PCIe-signalling devices. Buyers needing the lowest latency or highest throughput should consider drives built for PCIe interfaces instead.

Sequential read speed of 560 MBps

The headline sequential read figure of 560 MBps defines the practical ceiling for large file transfers on the SATA bus. If your workload demands sustained throughput above this level, a PCIe-based drive is required; otherwise this MX500 delivers consistent performance within the SATA limit.

How it compares

Measured against everything we stock in Internal NVMe & SATA SSDs, at today’s prices. Recalculated every night.

Price $276.99
Pricier than about 66% of the 1,994 comparable items (median $180.49).
Total capacity 2 TB
Higher than about 70% of the 1,368 comparable items (median 1 TB).
Sequential read speed Up to 560 MB/s
Lower than about 60% of the 1,180 comparable items (median 2,400 MB/s).
Price per TB $138.50 per TB
Cheaper than about 63% of the 1,362 comparable items (median $165.50 per TB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameCrucial
Product lineMX500
Model nameCT2000MX500SSD1
Part numberCT250MX500SSD1
Total capacity2 TB
Product typeInternal Solid State Drive (SSD)
Intended useConsumer
Performance
Sequential read speedUp to 560 MB/s
Sequential write speedUp to 510 MB/s
Random read (4K)Up to 95,000 IOPS
Random write (4K)Up to 90,000 IOPS
Storage
NAND flash type3D NAND
Cache memory0 MB
Data encryptionAES 256-bit encryption
Write endurance360 TB
Connectivity
Connection protocolSATA
Ports & slots
Interface typeSATA III
Size & build
Form factor2.5 in (6.35 cm)
Overall height7 mm
In the box
Included items2.5 in 7 mm SSD SATA 6Gb/s
7 mm to 9.5 mm spacer
Acronis True Image for Crucial cloning software and installation instructions
Environment & compliance
Operating temperature range0 °C to 70 °C
More details
Mean time to failure1.8 million hours

Questions about this item

Will my existing SATA cable and 2.5″ drive bay work with this 2TB MX500?

Yes, it uses a standard SATA III interface and a 2.5″ form factor, so any SATA data cable, SATA power connector and 2.5″ bay or caddy will fit.

Can I keep an older SATA II mechanical drive on the same controller while using this MX500?

The MX500 operates on SATA III and will share the controller with legacy SATA devices; each drive runs at its own negotiated link speed.

How can I verify the drive is delivering its rated 560 MB/s read and 510 MB/s write after installation?

Run a sequential benchmark such as CrystalDiskMark; results near 560 MB/s read and 510 MB/s write confirm the drive is performing to specification.

More in Internal NVMe & SATA SSDs

Similar items