Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 12-inch 6-pin PCIe extension cable with graphite metallic single-braid sleeving for custom power routing
This 12 inch extension adds length to a 6-pin PCI-E power lead so the graphics card can be positioned further from the power supply. It suits builders who want a cleaner cable run inside a custom loop or air-cooled chassis and who prefer a single-braid sleeve in graphite metallic.
The cable itself carries only the current the graphics card draws, so it adds no measurable heat or noise to the system. Its single-braid HSL sleeve does not trap additional warmth and the 30 cm length keeps voltage drop negligible for typical GPU loads.
Darkside Computer Modding produces the extensions in Canada using a tight single braid that resists fraying during repeated routing. The 6-pin PCI-E connectors seat firmly on both the PSU cable and the graphics card, and the graphite metallic finish matches other DarkSide sleeving for a uniform look. Builders who need an 8-pin or 6+2-pin PCI-E extension will have to choose a different model from the same range.
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Size & build | |
|---|---|
| Cable length | 1 ft (0.3 m) |
Plug the extension between the PSU cable and the graphics card, ensuring the 6-pin connectors click fully into both sockets; the common mistake is leaving one side partially seated, which can cause intermittent power.
The single braid sleeving resists abrasion, so no scheduled maintenance is required; replace only if the graphite metallic jacket frays or a connector pin becomes bent.
The 30 cm length adds minimal resistance, so the practical limit is the 6-pin connector's rated current; sustained loads near that rating will heat the pins before the cable itself.
More in Internal PSU & Riser Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?