We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black neoprene timing belt, 300 teeth, 2400 mm loop

Dayton

Dayton 1LWA6 Gearbelt HT 300 Teeth 2400 mm collectible

SKU CH-38DH-M0XFC

Neoprene timing belt with 300 teeth, 2400 mm pitch length, 20 mm width, operating from -22 to 194 degrees F

  • Product typeBearings, V-belts & Power Transmission Equipment
  • Product colorBlack
  • Precise 8 mm pitch ensures accurate timing
  • 300 teeth distribute load for smooth operation
  • 2400 mm closed loop fits exact drive lengths
  • Neoprene with nylon coating resists wear and heat
  • Fiberglass cords maintain tension from -22 to 194 °F

Industrial Timing Belt

The Dayton 1LWA6 is a Synchro-Link HTD timing belt designed for general industrial power transmission. It features a neoprene body with nylon tooth coating and fiberglass reinforcing cords for dimensional stability. The closed-loop construction has 300 teeth on one side with an 8 mm pitch.

Sustained Temperature Performance

The belt operates continuously between -22 and 194 degrees Fahrenheit without losing tension or tooth profile integrity. Neoprene resists oil and ozone degradation during extended duty cycles, while the fiberglass cords minimise stretch under constant load. The nylon coating reduces wear on pulley surfaces over long runs.

Installation and Common Issues

The 2400 mm pitch length must match the centre distance of the drive system exactly; no tension adjustment is possible with a fixed-length loop. Verify the 20 mm top width fits the pulley groove before fitting. Misaligned shafts or flanged pulleys with incorrect diameter will cause premature edge wear or tooth jump.

How it compares

Measured against everything we stock in Fan Collectibles & Memorabilia, at today’s prices. Recalculated every night.

Price $55.99
Pricier than about 79% of the 1,367 comparable items (median $26.99).

Specifications

Product
Brand nameDAYTON
Product typeBearings, V-belts & Power Transmission Equipment
Product colorBlack

Questions about this item

How much heat can the 8 mm pitch timing belt handle when running continuously?

The neoprene belt with fiberglass cords is rated for a maximum operating temperature of 194 degrees F and a minimum of -22 degrees F, suitable for general industrial use.

What pulley specifications are required for the 300-tooth HTD belt to engage correctly?

The belt requires HTD profile pulleys with an 8 mm pitch and a 20 mm top width to match the 300 teeth and Synchro-Link series design.

Will the 2400 mm closed-loop belt fit legacy equipment using the industry 2400-8M-20 designation?

Yes, the industry number 2400-8M-20 confirms compatibility with existing drives specified for that pitch length, tooth count, and width.

More in Fan Collectibles & Memorabilia

Similar items