Tritan UCP211-34 collectible Pillow Block Bearing Cast Iron Blue

Collectible Cast Iron Pillow Block Bearing

The Tritan UCP211-34 is a new collectible pillow block bearing presented in a blue finish. It features a cast iron housing with a base height of .905 in and base width of 2.362 in. The unit uses a radial ball insert made from alloy steel with a cylindrical bore diameter of 2 1/8 in. Double sealed closures retain the grease lubricant across a temperature range of -40 Degrees F to 250 Degrees F.

Fixed Bolt-Through Mounting for Display or Study

This bearing mounts via bolt-through holes with a center-to-center length and width of 6 23/32 in. The fixed expansion type and set screw locking secure the insert on a cylindrical shaft. A center height of 2 1/2 in positions the bore relative to the mounting surface. The cast iron housing provides mass and rigidity for static display or mechanical study without requiring additional support structures.

Sealed Grease Lubrication Across Wide Temperature

The double sealed design holds factory grease lubricant to reduce friction and exclude contaminants during handling. Operating limits extend from -40 Degrees F to 250 Degrees F, allowing the bearing to remain functional in cold or hot environments. No external lubrication lines or relubrication intervals are needed for normal display or light rotational use. Power draw and noise are negligible in static collectible applications.