Dayton 4YFH3 1/83 hp HVAC control motor
Unit bearing motor drives HVAC equipment at 1/83 hp with 115 V AC shaded-pole design
- Product colorTransparent
- Reliable HVAC control with 1/83 hp shaded-pole motor
- Low 0.62 A draw at 115 V AC keeps energy use modest
- Auto thermal protection safeguards motor during continuous operation
- Cast-iron frame and totally enclosed air-over design suit demanding environments
- Mounts horizontally or vertically with shaft up for flexible installation
Dayton 4YFH3 unit bearing motor
This single-phase shaded-pole motor delivers 1/83 hp at 1,550 rpm on 115 V AC. It draws 0.62 A at full load and produces 9 W output. The totally enclosed air-over design suits HVAC control duties where quiet, continuous operation is required.
Check voltage, shaft and mounting
Verify the supply is 115 V AC at 50 or 60 Hz. The 1/2 in. shaft rotates clockwise viewed from the lead end and uses a rear/foot mount on a cast-iron frame. Ensure the application tolerates a maximum ambient temperature of 40 °C and Class A insulation.
Replaces worn shaded-pole unit bearing motors
The motor is a direct swap for failed 1/83 hp shaded-pole units in fan-coil, ventilation or refrigeration controls. The upgrade is worthwhile when the original motor shows bearing noise, overheating or reduced airflow. It is not suited for applications demanding higher torque, variable speed or three-phase power.
How it compares
Measured against everything we stock in Heating & Cooling Controllers, at today’s prices. Recalculated every night.
- Price $25.99
- Cheaper than about 67% of the 1,762 comparable items (median $45.99).
Specifications
| Product | |
|---|---|
| Brand name | DAYTON |
| Product color | Transparent |
Questions about this item
What comes with the motor and what must be purchased separately?
The motor ships as a single unit with a 1/2 in. shaft and rear/foot mounting; no brackets, wiring harnesses or capacitors are included.
Which version should I choose for a 115 V shaded-pole application?
This model is the only variant listed — a 1/83 hp, 115 V AC shaded-pole motor rated at 0.62 A full-load current.
What does the 1/83 hp rating mean when the motor is installed in an HVAC unit?
It delivers about 9 W of mechanical output at 1,550 RPM with a 1.0 service factor, suitable for light air-over duties up to 40 °C ambient.
More in Heating & Cooling Controllers
Similar items
enshute-TC12015A 120V 15A hvac control 12 pack
- Surface Mount
- Heating and Cooling…
Gree Electric 27210071 hvac control remote holder grey
- HVAC Controls
Baldwin Digital Cooling Thermostat Controller 40-108°F 8.3A 1000W White
- 125VAC
- Wall Mount
XuLuaba STN2320-White HVAC Control, 12 Pack, 24 V, White
- 24 V AC
- Thermostat,Two Scre…





