We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Twelve white rectangular thermostat outlet plugs with LCD screens and front buttons

enshute-TC12015A 120V 15A hvac control 12 pack

SKU CH-T3J4-R9D5W MPN enshute-TC12015A

A 12-pack of 120V 15A plug-in thermostats with sensor, timer and heating/cooling modes

  • Mounting styleSurface Mount
  • Product typeHeating and Cooling Control with Sensor, Cooling, Heating, T
  • Product colorWhite
  • Number of items12 pack
  • Sold as1, Heating and Cooling Control with Sensor
  • Key featuresProgrammable, Sekelo
  • Plug-and-play 120 V outlet handles up to 15 A loads
  • Heating and cooling modes switch automatically across -40 °F to 210 °F range
  • Four timer modes offer 0-99 hours 59 minutes of cycle or countdown control
  • Temperature calibration ±9.9 °F plus memory retains settings after power loss
  • Twelve-pack supplies multiple greenhouses, reptile enclosures or brewing vessels

12-pack digital thermostat controllers for heating

Each unit is a surface-mount plug-and-play outlet rated at 120VAC and 15A maximum current. The controllers suit greenhouses, reptile enclosures, home brewing, fermentation and other temperature-critical setups. An LCD display shows the measured temperature and active mode. The 12-pack quantity supports multi-zone installations or spare units.

Thermals noise and power draw in normal use

The controller itself consumes minimal power while switching connected loads up to 15A at 120V. No internal fan or active cooling is described, so operation is silent. Temperature accuracy is rated at ±1% across a -40°F to 210°F control range. Calibration adjustment of -9.9°F to +9.9°F compensates for sensor placement.

Behaviour under sustained load

Timer modes F01 through F04 handle cycles, countdowns and delayed on/off sequences up to 99 hours 59 minutes. Temperature control and timer functions cannot run simultaneously, so sustained automated cycling relies on the temperature differential logic. A memory function retains all settings through power outages, and a reset restores factory defaults when needed.

How it compares

Measured against everything we stock in Heating & Cooling Controllers, at today’s prices. Recalculated every night.

Price $25.99
Cheaper than about 67% of the 1,762 comparable items (median $45.99).

Specifications

Product
Brand nameSekelo, enshute
Model nameEnshute-TC12015A
Part numberSK015
Product typeHeating and Cooling Control with Sensor, Cooling, Heating, Touch
Product colorWhite
Size & build
Mounting styleSurface Mount
In the box
Number of items12 pack

Questions about this item

How do I mount the surface-mount TC12015A and what wiring step is often missed?

Mount the white plastic housing on a flat surface with screws, then plug the 120 VAC supply into the controller and your heater or cooler into the outlet; the step often missed is verifying the load does not exceed 15 A before turning it on.

What part will need replacement first on the TC12015A after long use?

The internal relay that switches the 15 A load is the wear item; its contacts degrade with each heating or cooling cycle, so plan to replace the whole unit when switching becomes unreliable.

What limit appears first when the TC12015A runs continuously at high load?

The 15 A maximum working current is the hard limit; sustained loads above that will trip the protection or overheat the relay, so keep total connected equipment at or below 15 A.

More in Heating & Cooling Controllers

Similar items