Nippon Labs SVGA-15 15 ft SVGA Male to Male cable
- Male to Male
- SVGA
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Genuine Dell OEM 15.6-inch FHD 250-nits LCD ribbon cable with 6mm IR camera for Latitude 7520, part W5H84
This is a genuine Dell OEM LCD video ribbon cable built for the Latitude 7520. It matches part number W5H84 and the alternate reference GDC50_MB-LCD-CAM_250FHD_NTS_6IR_ASSY. The cable is designed for 15.6 inch FHD panels rated at 250 nits brightness. Buyers with touch-screen models or different brightness specifications cannot use this part.
The ribbon carries video and camera signals without active electronics, so it adds no heat and draws no power. Operation is silent because there are no moving parts or fans. Thermal behaviour depends entirely on the laptop's own cooling system.
The thin flat-flex design requires careful routing inside the display hinge area to avoid creasing. Connectors on each end mate with the motherboard and the LCD assembly that includes the 6 mm IR camera module. Installers must verify the existing cable part number before fitting, as the 7520 uses several different cables across screen variants.
Measured against everything we stock in VGA Monitor Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Dell |
| Product type | Laptop-computer-replacement-parts |
Remove the bottom cover and battery first. Route the cable through the hinge channel exactly as the original lay, then seat both the display-end and motherboard-end connectors fully. The step most people miss is re-taping the cable to the panel frame so it cannot flex when the lid moves.
The cable itself has no service schedule. Inspect it if the display flickers, shows lines, or the IR camera stops working after repeated lid cycles. Replace the cable only if the conductors or the 6 mm IR camera flex are physically damaged.
Repeated bending at the hinge is the first wear point. The 6 mm IR camera flex and the 250-nits FHD video traces can fatigue, causing intermittent video or camera loss before the connectors themselves fail.
More in VGA Monitor Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?