DELL PowerEdge R630 1U rack server E5-2637 V3 3.5GHz 24GB DDR4 2x 300GB SAS H730
- 1U
- Rack
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 1U rack server with one Xeon E5-2637 v3 at 3.5 GHz, 64 GB DDR4, two 1 TB SATA drives and an H330 RAID controller
The Dell PowerEdge R630 fits a single Xeon E5-2637 v3 quad-core processor running at 3.5 GHz and 64 GB of DDR4 memory into a 1U rack height. It targets workloads that need high clock speed in a shallow chassis rather than maximum core count.
Eight 2.5-inch bays accept SAS or SATA drives; the unit ships with two 1 TB 7.2K SATA drives behind a PERC H330 controller that supports RAID 0, 1, 5, 10, 50 and 60. Dual 750 W hot-swap supplies keep the server running if one unit fails.
The board holds 24 DIMM slots but the installed 64 GB already reaches the listed maximum capacity, so no further memory can be added. Only one processor socket is populated and the second remains empty; verify your licensing and application scaling before assuming a second CPU can be dropped in.
Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.
New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | DELL |
| Product line | PowerEdge |
| Model name | PowerEdge R630 |
| Product type | Rack |
| Processor | |
| Processor | Intel Xeon |
| Chipset | Intel C610 |
| Max supported CPUs | 2 |
| Memory | |
| Installed RAM | 64 GB |
| Type of memory | DDR4 |
| Maximum RAM capacity | 64 GB |
| Memory slot count | 24 |
| Storage | |
| Installed SSD | No |
| Disk controller | Dell Perc H330 Controller |
| Drive interface | SATA |
| Supported RAID levels | RAID 0/1/5/10/50/60 |
| Maximum storage | 14 TB |
| Optical drive | No |
| Graphics | |
| Video RAM | 8 MB |
| Graphics chip | Matrox G200 |
| Ports & slots | |
| Network ports | 4 x Ports |
| Expansion card slots | Up to 3 x PCIe 3.0 slots plus dedicated PERC slot |
| Power | |
| Hot-swap redundant PSU | Yes |
| Size & build | |
| Rack height | 1U |
| Product weight | 60 lb (27.2 kg) |
| Software | |
| Operating system | No |
| More details | |
| Management controller | iDRAC8 with Lifecycle Controller, iDRAC8 Express (default), iDRAC8 Enterprise (upgrade) 8 GB vFlash media (upgrade), 16 GB vFlash media (upgrade) |
Other versions of this model
Yes, the 2.5-inch 7.2K SATA drives run at their native 6Gbps link speed; the H330 12Gbps controller does not increase that ceiling.
The server is 26.8 inches long, 17.44 inches wide and 3.4 inches high; it needs a four-post rack with at least 26.8 inches of usable depth and standard 1U sliding rails.
The H330 plugs into the dedicated PERC slot on the motherboard, not into any of the three PCIe 3.0 expansion slots; using a PCIe slot instead is the common error.
More in Rack & Tower Servers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?