We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

DELL

DELL PowerEdge R730xd 2U rack server 2× Xeon E5-2699 v3 2.3 GHz 18-core 64 GB DDR4

SKU CH-HBM2-42YGJ

2U rack server with dual 18-core Xeon processors at 2.3 GHz, 64 GB DDR4 ECC memory, PERC H730 RAID controller, 24-bay 2.5" SAS storage, quad-port 1/10 GbE networking.

  • ProcessorIntel Xeon
  • Installed RAM64 GB
  • Video RAM8 MB
  • Installed SSDNo
  • ChipsetIntel C610
  • Processor core count18-Core Processor
  • Dual 18-core Xeon processors handle heavy parallel workloads at 2.3 GHz base clock
  • 64 GB DDR4 2133 MHz registered ECC memory supports large virtualisation density
  • 24-bay 2.5-inch chassis with PERC H730 controller enables mixed SAS and SATA storage tiers
  • Quad-port network daughter card provides 2× 1 GbE and 2× 10 Gb SFP+ connectivity
  • iDRAC 8 Enterprise and dual 750 W platinum PSUs give remote control and power redundancy

Dual 18-core Xeon density

The Dell PowerEdge R730xd packs two Intel Xeon E5-2699 v3 processors at 2.3 GHz with 18 cores each into a 2U rack chassis. Thirty-six threads and 64 GB of DDR4-2133 ECC memory give virtualisation hosts and database nodes the core count and memory bandwidth they need. The PERC H730 controller with 1 GB cache manages up to twenty-four 2.5-inch SAS or SATA drives for local storage capacity.

Platinum redundant power and thermals

Two 750 W platinum-efficiency hot-swap supplies share the load, keeping the system running if one unit fails. Front-to-rear airflow across the 2U form factor moves heat from the CPUs, memory risers and drive bays without requiring extreme fan speeds in typical rack environments. The iDRAC 8 Enterprise module provides out-of-band monitoring of temperatures, fan curves and power draw so operators can tune cooling policies remotely.

Sustained throughput for storage-heavy workloads

Dual 10 Gb SFP+ and dual 1 GbE ports on the X520/I350 daughter card feed data to the PERC H730, which supports RAID 0, 1, 5, 6, 10, 50 and 60 plus pass-through mode. Two 300 GB 10 K SAS drives handle boot and logging while the remaining bays accept high-capacity SAS or SATA media for continuous write streams. The platform is built for workloads such as data warehousing, VDI and HPC data nodes that demand steady I/O rather than short bursts.

How it compares

Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.

Price $565.99
Cheaper than about 91% of the 17,641 comparable items (median $1,910.99).
Installed RAM 64 GB
Lower than about 70% of the 15,103 comparable items (median 128 GB).
Video RAM 8 MB
Typical for this category: the median of 8,309 items is 0.01 GB.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameDELL
Product linePowerEdge R730XD
Model nameR730xd
Product typeRack
Processor
ProcessorIntel Xeon
Processor core count18-Core Processor
Processor socketLGA 2011-3
ChipsetIntel C610
Processor speed2.3 GHz
Installed CPUs2
Max supported CPUs2
Memory
Installed RAM64 GB
Type of memoryDDR4
Maximum RAM capacity1.5 TB
Memory slot count24
Storage
Installed SSDNo
Disk controllerDell Perc H730 1 GB Controller
Drive interfaceSAS
Supported RAID levelsRAID 0/1/5/6/10/50/60
Graphics
Video RAM8 MB
Graphics chipMatrox G200
Connectivity
Network controllerDell Intel X520/I350 Quad Port 2x 1GbE 2x 10Gb SFP+ Network Daughter Card
Ports & slots
Network ports4 x Ports
Expansion card slots1 x PCIe 3.0 x16 Slot, Single Riser Included (Riser 3)
Management interfaceRJ 45
Power
Hot-swap redundant PSUYes
Size & build
Rack height2U
Software
Operating systemNo

Questions about this item

How do I install the server and what step do people often miss?

Mount the included ReadyRails in a 2U rack space, slide the chassis in, connect the two 750 W PSUs to separate circuits, attach the bezel, then configure the PERC H730 RAID before installing an OS.

What maintenance or replacement will the server need later?

The PERC H730 controller uses a battery-backed cache; plan to replace that battery module when iDRAC 8 reports a degradation alert.

What limit appears first under sustained heavy load?

Two 2.3 GHz 18-core Xeon E5-2699 v3 processors can push the dual 750 W platinum PSUs toward their combined output ceiling during prolonged all-core turbo.

More in Rack & Tower Servers

Similar items