We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

DELL

DELL PowerEdge R940 3U rack server 4× Xeon Platinum 8160 2.1GHz 24-core 768GB DDR4 2× 400GB SSD H730P

SKU CH-CYW1-1SAR8

Four-socket 3U rack server with 768 GB DDR4 ECC memory, PERC H730P RAID controller and dual 400 GB SSDs

  • ProcessorIntel Xeon
  • Installed RAM768 GB
  • Video RAM8 MB
  • Installed SSD2 × 400 GB SATA SSD
  • ChipsetIntel C620
  • Processor core count24-Core Processor

CPU Model Platinum 8160

  • Four Xeon Platinum 8160 CPUs at 2.1 GHz with 24 cores each
  • 768 GB DDR4 2666 MHz ECC memory across 48 slots
  • PERC H730P RAID controller supports RAID 0, 1, 5, 6, 10, 50, 60
  • Two 400 GB SATA SSDs and X520/I350 quad-port 1/10 GbE networking
  • Dual 1600 W platinum power supplies with iDRAC9 Enterprise remote management

Four-socket Xeon Platinum 8160 server for heavy

The PowerEdge R940 is a 3U rack server built around four Intel Xeon Platinum 8160 processors running at 2.1GHz with 24 cores each. It ships with 768GB of DDR4 registered ECC memory across 24 slots and a PERC H730P controller driving two 400GB SATA SSDs. Redundant 1600W power supplies and iDRAC9 Enterprise remote management are included.

Suits dense compute needs.

This system fits teams that need maximum processor density and memory capacity in a standard 3U form factor. Quad-socket scaling supports heavy virtualization, in-memory databases, and parallel workloads. Buyers who need only one or two processors should look at smaller platforms.

48 DDR4 slots and four LGA 3647 sockets

The board provides 48 memory slots with a 6TB maximum capacity, populated here with 24 modules of 32GB DDR4-2666. Four LGA 3647 sockets are fully occupied by the Platinum 8160 CPUs, so no further processor upgrades are possible. The H730P controller handles RAID 0, 1, 5, 6, 10, 50, and 60 across the eight 2.5-inch drive bays.

How it compares

Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.

Price $4,878.99
Pricier than about 76% of the 17,641 comparable items (median $1,910.99).
Installed RAM 768 GB
Higher than about 90% of the 15,103 comparable items (median 128 GB).
Video RAM 8 MB
Typical for this category: the median of 8,309 items is 0.01 GB.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameDELL
Product linePowerEdge R940
Model nameR940
Product typeRack
Processor
ProcessorIntel Xeon
Processor core count24-Core Processor
Processor socketLGA 3647
ChipsetIntel C620
Processor speed2.1 GHz
Installed CPUs4
Max supported CPUs4
Memory
Installed RAM768 GB
Type of memoryDDR4
Maximum RAM capacity6 TB
Memory slot count48
Storage
Installed SSD2 × 400 GB SATA SSD
Disk controllerDell Perc H730P 2 GB Controller
Drive interfaceSATA
Supported RAID levelsRAID 0/1/5/6/10/50/60
Graphics
Video RAM8 MB
Graphics chipMatrox G200
Connectivity
Network controllerDell Intel X520/I350 Quad Port 2x 1GbE 2x 10Gb SFP+ Network Daughter Card
Ports & slots
Network ports4 x Ports
Expansion card slotsUp to 13 PCIe Gen 3 Slots, 3x PCIe x8, and 10 x PCIe 3.0 x16 slots
Management interfaceRJ 45
Power
Hot-swap redundant PSUYes
Size & build
Rack height3U
Software
Operating systemNo

Questions about this item

How loud and hot does the R940 run with its dual 1600 W power supplies under continuous load?

The server ships with redundant 1600 W platinum-efficiency power supplies designed for hot-swap operation, keeping power delivery stable during all-day workloads.

Which cabling and drives must I already have to use the PERC H730P controller and the eight 2.5-inch bays?

The H730P supports SAS and SATA drives; the two installed 400 GB SSDs use SATA, so additional 2.5-inch SAS or SATA drives and matching cables are required to fill the remaining bays.

Will the quad-port X520/I350 network card with two 1 GbE and two 10 Gb SFP+ ports work with my existing copper switches?

The 1 GbE ports connect directly to standard copper switches; the 10 Gb SFP+ ports require compatible SFP+ transceivers and fibre or direct-attach cables to link to older 10 GbE infrastructure.

More in Rack & Tower Servers

Similar items