ASRock Rack ROMED8-2T/BCM server motherboard SP3 LGA 4094 8 DDR4 3200 10GbE
- EPYC
- Supports AMD EPYC 7…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Replacement motherboard for Dell Precision 7730 with integrated i5-8400H quad-core processor at 2.5 GHz and DDR4 memory support
This motherboard carries the Intel Core i5-8400H quad-core processor clocked at 2.5 GHz and uses the FCPGA1440 socket. It is built to Dell specifications for the Precision 7730 mobile workstation and supports DDR4 memory. The part arrives new and ready for installation.
It replaces the original system board when the laptop will not power on, shows video artefacts or suffers from intermittent port failures. The upgrade path is limited to this exact part number, so the jump is only worth it when the current board is confirmed defective or when a service manual specifies V490F as the required revision.
Confirm that the Precision 7730 service tag lists V490F or 0V490F as the approved system board before ordering. Check that the existing heatsink assembly, CPU cooler mounting and display cable connectors match the board layout. Ensure the BIOS version on the replacement board is compatible with the installed peripherals and that the DDR4 modules in use are seated correctly.
Measured against everything we stock in Server & Workstation Boards, at today’s prices. Recalculated every night.
New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.
| Processor | |
|---|---|
| Processor | Motherboard |
| CPU socket | FCPGA1440 |
The i5-8400H is soldered to the FCPGA1440 socket on the V490F motherboard, so no separate CPU installation is required.
Replace the board by disconnecting all cables, removing the heatsink assembly, swapping the V490F unit, then reapplying thermal paste before refitting the cooler — skipping fresh paste causes overheating.
The V490F motherboard uses DDR4 memory, so any future RAM upgrades or replacements must match that standard.
More in Server & Workstation Boards
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?