We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red internal power cable 800mm with spade and DuPont connectors

Dimastech

Dimastech Switch Cable Red 800mm 2-Pin I/O internal power cable

SKU CH-Y01P-XD7AM

Red internal cable connects a vandal-resistant switch to a motherboard using spade and 2-pin DuPont connectors over 800 mm

  • Cable length2.6 ft (0.79 m)

Color Red 800mm

  • Connect vandal-resistant switch to motherboard
  • 800 mm cable reaches across full-size cases
  • Spade connectors secure switch termination
  • DuPont 1/2-pin header fits standard front-panel headers
  • Red sleeve simplifies cable identification in dense builds

Internal Power Switch Cable

This 2-pin I/O cable connects a vandal-resistant switch to a motherboard front-panel header. One end terminates in spade connectors for the switch while the other uses a DuPont connector for the board. It is built for custom chassis builders who need a reliable front-panel power link. The cable measures 800mm end to end.

800mm Length and DuPont Header

The single specification that determines fit is the 800mm overall length combined with the 1 and 2 pin DuPont motherboard connector. Verify that this reach spans your switch location to the front-panel header without tension. The spade terminals on the switch side are fixed, so the switch must accept that connector style.

Passive Thermals and Negligible Draw

The cable carries only the low-current motherboard power-switch signal, so it generates no measurable heat and requires no active cooling. It adds zero fan noise because it has no moving parts. Power draw is limited to the momentary logic signal the motherboard expects from a front-panel button.

How it compares

Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.

Price $2.99
Cheaper than about 97% of the 7,839 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Size & build
Cable length2.6 ft (0.79 m)

Other versions of this model

3 more in the same range

Questions about this item

What does the 800 mm length mean for routing inside a case?

The 800 mm cable gives you about 2.6 ft of reach to route from a front-panel vandal-resistant switch to the motherboard header without stretching.

What does the 2-pin I/O DuPont connector actually plug into on the motherboard?

It fits standard 1-pin or 2-pin front-panel headers labelled PWR_SW, RESET_SW or similar, using the DuPont pins supplied on the board end.

What mounting clearance do the spade connectors need at the switch end?

The spade terminals slide onto the switch tabs, so you need only enough room behind the panel for the crimp bodies and the cable bend radius.

More in Internal PSU & Riser Cables

Similar items