Dogfish Technology 2.5"-SATA III-64GB internal SSD
- 2.5 in (6.35 cm)
- Internal SSD
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 2.5-inch SATA internal SSD with 60 GB of 3D NAND storage, delivering up to 350 MB/s read and 80 MB/s write speeds in a 7 mm form factor
Capacity 60GB
This 60 GB internal solid state drive uses a 2.5 inch form factor and a SATA interface with 3D NAND memory. It is intended for consumer desktops and laptops that need a simple storage refresh. The drive weighs 40 g and measures 7 mm in height.
The drive fits standard 2.5 inch bays using the SATA data and power connectors found in most laptops and desktops. Its 7 mm height suits slim chassis without adapters. Common issues include loose cables or BIOS settings that default to IDE mode instead of AHCI.
The SATA 6 Gb/s link caps real-world throughput well below the 550 MB/s marketing figure. Sequential reads reach up to 350 MB/s and writes up to 80 MB/s on this model. Random workloads and mixed I/O will run slower than the sequential peaks.
Measured against everything we stock in Internal NVMe & SATA SSDs, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | THREE COLOUR DOGFISH |
| Product line | 2.5 in-SATA III-60 GB |
| Model name | 2.5 in-SATA III-60 GB |
| Total capacity | 60 GB |
| Product type | Internal Solid State Drive (SSD) |
| Intended use | Consumer |
| Performance | |
| Sequential read speed | UP TO 350 MB/s |
| Sequential write speed | UP TO 80 MB/s |
| Storage | |
| NAND flash type | 3D NAND |
| Controller chip | SM2256KAB |
| Ports & slots | |
| Interface type | SATA3 |
| Size & build | |
| Form factor | 2.5 in (6.35 cm) |
| Overall height | 7 mm |
| Overall width | 69.9 mm |
| Product depth | 100 mm |
| Product weight | 40g |
| Environment & compliance | |
| Operating temperature range | 0 °C to 75 °C |
| Storage temperature range | -40 °C to 85 °C |
| Operating humidity range | 0% ~ 95% |
| More details | |
| Mean time between failures | 10,000,000 h |
Other versions of this model
Run a benchmark tool such as CrystalDiskMark or AS SSD and compare the sequential read result to the 350 MB/s specification; the drive also reports health through S.M.A.R.T. attributes.
The box contains the 2.5-inch 60 GB SSD only; you must supply a SATA data cable, a SATA power connection, and a 7 mm drive bay or bracket.
This model is the 60 GB version; the same series is offered up to 2 TB if you need more space.
More in Internal NVMe & SATA SSDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?