We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White rectangular wall-mounted digital thermostat with backlit display and push-button controls

ecoartheating ECOT02 HVAC Control 120/240V 15A -40 to 210°F ±0.1°F

SKU CH-QGZ9-HQ64V MPN ECOT02

Digital thermostat controls heating and cooling from -40 to 210 °F with ±0.1 °F accuracy, 15 A relay, cyclic timing and power memory

  • Rated voltage120/240
  • Mounting styleWall Mount
  • Relay contact120
  • Product typeHeating / Cooling, Push Button
  • Size or dimensions1.55 in × 2.26 in × 4.15 in
  • Product colorWhite
  • Precise temperature control from -40 to 210 °F with ±0.1 °F accuracy
  • 15 A relay handles up to 1800 W heaters at 120 V
  • Backlit display stays readable in dark environments
  • Power memory plus cyclic and countdown timer modes
  • Compact wall-mount unit fits incubators, greenhouses and brewing setups

Plug-in thermostat for heating and cooling

The ecoartheating ECOT02 is a wall-mount digital thermostat that plugs into a 120 V or 240 V outlet and switches loads up to 15 A. It suits incubators, reptile rooms, greenhouses and home-brewing setups where a single heater or chiller must be held to a precise set-point.

Sustained 1800 W relay operation

The 15 A relay is rated for continuous 1800 W heater loads at 120 V, so the unit maintains its switching integrity during long heating cycles without contact degradation. Power-memory retains the last mode after an outage, and the cyclic timer can run repeated on-off sequences day after day without drift.

120 V contact limit on a dual-voltage housing

Although the controller accepts 120 V or 240 V supply, the relay contact itself is specified at 120 V, so 240 V loads must be switched through an external contactor. The -40 °F to 210 °F range with 0.1 °F resolution is only valid within the unit’s own operating envelope; sensors or wiring outside that envelope are not covered.

How it compares

Measured against everything we stock in Heating & Cooling Controllers, at today’s prices. Recalculated every night.

Price $25.99
Cheaper than about 67% of the 1,762 comparable items (median $45.99).

Specifications

Product
Brand nameEcoartheating
Model nameECOT02
Product typeHeating / Cooling, Push Button
Product colorWhite
Power
Rated voltage120/240
Size & build
Size or dimensions1.55 in × 2.26 in × 4.15 in
Mounting styleWall Mount
More details
Relay contact120

Questions about this item

How much power does the ECOT02 draw when it runs a 1800 W heater continuously?

The controller itself consumes minimal standby power; the 15 A relay passes up to 1800 W to the heater, so total draw equals the heater load plus a few watts for the display and logic.

What voltage supply and plug type must I already have for the ECOT02 to operate?

The unit requires a 120 V or 240 V mains socket and fits a standard North American wall outlet; the load plugs into the built-in receptacle on the controller.

Will the ECOT02 still control temperature accurately if I keep my older 110 V incubator heater?

Yes, the relay is rated for 120 V operation and the ±0.1 °F precision applies across the full -40 to 210 °F range, so legacy 110 V heaters work without calibration changes.

More in Heating & Cooling Controllers

Similar items