We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 40cm IDE Molex 4-pin male-to-four-female power splitter cable with 18AWG wires

ELFJMZP IDE Molex 4 Pin 1-to-4 Power Splitter Cord 40cm 18AWG Black

SKU CH-CGKC-TD555

Splits one Molex 4-pin port into four female connectors for fans, drives and other Molex devices using a 40 cm 18 AWG cable

  • Connector detailsIde Molex 4 Pin to Male-to-Female
  • Connector genderMale to Female
  • Cable shieldingBlack
  • Build details18awg
  • Product typeBlack
  • Product colorBlack
  • Expands one Molex port into four female connectors
  • 40 cm length aids internal cable routing
  • 18 AWG tinned copper wire carries 12 V and 5 V reliably
  • Locking clips on connectors prevent accidental disconnection
  • Plug-and-play design needs no tools for installation

1-to-4 Molex Power Splitter

This 40cm cable converts a single 4-pin IDE Molex male connector into four female ports. It uses 18AWG tinned copper wire rated for standard 12V and 5V ATX power delivery. The black PVC jacket measures 15.7 inches in length with a compact 1.02 inch width profile. It adds three extra power connections for internal drives or cooling fans.

Who this suits and who should look elsewhere

Builders adding multiple case fans, legacy hard drives or optical drives to a standard ATX supply will find the four female connectors convenient. The secure locking clips help prevent accidental unplugging during assembly or transport. It is not for systems that lack a large 4-pin D-type Molex source port. It is also unsuitable for anyone needing to draw more than the source port's rated capacity across all four outputs.

Deciding specification: 18AWG wire gauge

The 18AWG conductor size determines the safe current-carrying limit for the entire splitter assembly. Every device plugged into the four female connectors shares this single wire path back to the power supply. Exceeding the port's typical 150W limit risks voltage drop, overheating or connector damage. Check the combined draw of all attached components before connecting.

How it compares

Measured against everything we stock in Y-Splitter Power Cables, at today’s prices. Recalculated every night.

Price $19.99
Pricier than about 80% of the 433 comparable items (median $13.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameELFJMZP
Product typeBlack
Product colorBlack
Ports & slots
Connector detailsIde Molex 4 Pin to Male-to-Female
Connector genderMale to Female
Size & build
Cable shieldingBlack
Build details18awg

Questions about this item

Does the splitter ship with any extra cables or adapters, or is the 40 cm 1-to-4 Molex cord the only item in the package?

The package contains only the single 40 cm splitter cable with one male and four female Molex connectors; no additional cables, adapters or mounting hardware are included.

Should I pick a different wire gauge or length for a compact build, or is the 18 AWG 40 cm version the right choice?

This model is offered only in 18 AWG and 40 cm length; the 18 AWG tinned copper conductors handle standard 12 V / 5 V Molex loads while the 40 cm reach suits most mid- and full-tower layouts.

The spec mentions ~150 W per Molex port — what does that mean when I plug four fans or drives into this splitter?

The 150 W limit applies to the single PSU port feeding the splitter, so the combined draw of all four connected devices must stay within that ceiling to avoid voltage drop or overheating.

More in Y-Splitter Power Cables

Similar items